The Infineon wireless infrastructure driver amplifiers can be used as pre-drivers or drivers in RF applications, from massive MIMO 5G base stations to small cells and access points.
The tiny amplifiers sit typically between transceiver IC and power amplifier (PA), but can also be used as power amplifier for low-power applications. The driver amplifiers boast high linearity and an excellent wide-band gain flatness for optimum linearisation results of the driven PA.
The high driving capability and the high gain allow a minimum number of components in the TX line-up, typically requiring only the pre-driver between transceiver IC and power amplifier. In addition, the differential input of the pre-driver saves the balun and converts the differential signal to single-ended, without additional losses.
The BGA7P320 is a 3,3 to 4,2 GHz mid-band driver amplifier that can be used as pre-driver or driver in RF applications from MIMO 5G base stations to small cells and access points. The SiGe based amplifier offers best RF performance and a high OP1dB: 27,8 dBm. This driver amplifier boasts high linearity and an excellent wide-band gain flatness of less than 0,5 dB for optimum linearisation results of the driven PA.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Long-range Wi-Fi HaLow module TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...Quectel launches 3GPP NTN comms module Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...SIMCom’s A7673x series Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...General-purpose MCU with RISC-V architecture EBV Electrolink
DSP, Micros & Memory
Renesas has released a general-purpose MCU to enhance its existing RISC-V portfolio, and this is its first MCU using a RISC-V core developed internally at the company.
Read more...AI-native IoT platform launched EBV Electrolink
AI & ML
These highly-integrated Linux and Android SoCs from Synaptics are optimised for consumer, enterprise, and industrial applications and deliver an ‘out-of-the-box’ edge AI experience.
Read more...Serial SRAM up to 4 MB EBV Electrolink
DSP, Micros & Memory
The chips are designed to provide a lower-cost alternative to traditional parallel SRAM products, and include optional battery backup switchover circuitry in the SRAM memory to retain data on power loss.
Read more...Long-range connectivity module Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...4G LTE-M/NB-IoT connectivity reference design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
printer friendly version