DSP, Micros & Memory


AMD Artix evaluation platform

30 September 2024 DSP, Micros & Memory

The Avnet AUBoard 15P Development Kit is a new evaluation platform designed for engineers to rapidly begin developing solutions around AMD Artix UltraScale+ FPGAs, based on a production-proven 16 nm architecture. The range of interfaces enabled on the board are optimised to support a variety of applications, including machine vision frame grabbers, medical imaging acquisition and processing, and industrial networking.

The feature-rich AU15P device features 170K programmable logic cells and 12 GTH 16,3 Gbps transceivers. The board contains 2 GB DDR4 memory and can boot from the 512 Mb of ISSI QSPI Flash. A Microchip PHY enables the 10/100/1000 Ethernet interface.

A microUSB port provides on-board JTAG/UART access, and a Renesas clock generator and ECS crystal oscillators provide clocking to the AU15P device, GTH transceivers, JTAG, and communication interfaces.

A combination of slide switches, push buttons, and LEDs (red and RGB) allow user interaction with the board with a temperature sensor from STMicroelectronics adding environmental data to the system.

Additionally, 80 FPGA I/Os are exposedthrough the Samtec connectors for FMC LPC high-speed expansion and one Click Board site. The board is powered from a 60 W power supply.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

ESP32-C6 achieves PSA-L2
iCorp Technologies DSP, Micros & Memory
Espressif Systems recently announced that its ESP32-C6 microcontroller has achieved PSA Certified Level 2 (PSA-L2) security certification, making it the first RISC-V-based MCU to reach this level.

Read more...
Microprocessor with integrated NPU
Avnet Silica DSP, Micros & Memory
The RZ/G3E from Renesas is a microprocessor integrated with quad CPU and NPU in one chip, improving power efficiency, reliability, and security.

Read more...
Nordic Semiconductor launches nRF Connect SDK Bare Metal option for nRF54L series
Avnet Silica DSP, Micros & Memory
This is a new, RTOS-independent software solution for Bluetooth LE development, designed to ease developers’ migration from the legacy nRF5 SDK and nRF52 series to the next-generation nRF54L series.

Read more...
Dual-core support in NECTO Studio
DSP, Micros & Memory
MIKROE recently announced that version 7.3.0 of its NECTO Studio Integrated Development Environment now supports dual-core MCUs, allowing designers to program and debug each core independently.

Read more...
Post Quantum Cryptographic firmware library
DSP, Micros & Memory
The STM32 post-quantum cryptographic library enables developers to satisfy application requirements for any combination of data integrity, confidentiality, identification/authentication, and nonrepudiation.

Read more...
MultiVolt series of oscillators
Future Electronics DSP, Micros & Memory
The ECS-3225MVQ from ECS Inc. is a compact, quartz-based MultiVolt oscillator designed for precision timing in automotive, industrial, and portable electronic systems.

Read more...
MCU platform for battery-powered devices
Altron Arrow DSP, Micros & Memory
The MCX W23 is a new dedicated wireless MCU platform from NXP for battery-powered sensing devices.

Read more...
Versatile range of camera modules
EBV Electrolink Opto-Electronics
The CAM-66GY pro-modules from ST are a full range of sample camera modules made for a seamless evaluation and integration of the VD66GY 1,5-megapixel colour image sensor.

Read more...
Drive innovation with AURIX TriCore MCUs
Future Electronics DSP, Micros & Memory
Infineon’s AURIX TriCore family balances safety, performance, and energy efficiency to offer a scalable and future-ready portfolio.

Read more...
Elevate your motor control designs
EBV Electrolink DSP, Micros & Memory
Built on an Arm Cortex-M33 core running up to 180 MHz, the MCX A34 family combines high-performance math acceleration and advanced motor control subsystems to unlock efficient motor drive solutions.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved