Telecoms, Datacoms, Wireless, IoT


Innovative upgrade process for 2G/3G

29 November 2024 Telecoms, Datacoms, Wireless, IoT


The pending shutdown of the 2G and 3G networks (gazetted for 31 December 2027) signals the end of a communications era which began in 1994. The technology will have seen an entire generation enjoy a level of internet connectivity for 33 years by the time it is officially shut down.

It is common knowledge that the likelihood of service providers throwing a proverbial switch on 31 December 2027, having fully maintained the 2G and 3G networks up until that point, is extremely unlikely. What is likely to happen during this sunset period, especially on the back of already near-obsolescence of 2G network equipment, is for the availability of the connectivity mediums to begin to reduce between now and the shutdown date.

As ageing infrastructure fails, it is reasonable to assume that it will become decommissioned, leaving existing infrastructure to carry the data traffic load. This translates to less availability. As a supplier of hardware to the communications industry, Otto Wireless Solutions is already seeing this happening.

Most of the large corporate clients began their 4G transition two to three years ago, and are well underway with their field replacement strategies. However, and at the risk of generalising, it is the small, medium and medium-large business sector which has predominantly only now started considering the timeframes.

To assist router users with this transition, Otto Wireless Solutions has, in collaboration with Wlink, launched the ‘Bring out your (Nearly) Dead’ campaign, an innovative and aggressively priced campaign to give existing Wlink customers a cost-effective upgrade option, and encouraging customers who use competitive devices to switch to Wlink.

The campaign has three approaches:

• Existing Wlink customers can bring in their ‘nearly dead’ 3G Wlink routers for upgrade. Depending on the model, there are up to three components which may need to be replaced, to bring the model up to the equivalent 4G model. The router is tested on receipt, and then fully tested again after upgrade.

• For completely new clients, the WL-R230LAD router has been made available at a highly competitive price point. This is a DIN rail-mount device incorporating 4G connectivity, 2,4 GHz WiFi, Dual SIM, three Ethernet ports, three I/O, RS232, and USB.

• The last option is the ‘Bring out your (Nearly) Dead’ 3G router (any brand, working or not). When handed in at Otto Wireless Solutions, on the purchase of a new WL-R230LAD router, the already aggressive price of the Wlink device will be further discounted by another R400.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Wi-Fi 6 and Bluetooth LE co-processor
Altron Arrow Telecoms, Datacoms, Wireless, IoT
STMicroelectronics has released its ST67W611M1, a low-power Wi-Fi 6 and Bluetooth LE combo co-processor module.

Read more...
Improving accuracy of outdoor devices
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
In a real-world environment, accessing a direct satellite signal is not always possible, and it cannot be relied upon as the only solution to provide a device with accurate location at all times.

Read more...
New 3dB hybrid couplers
Electrocomp Telecoms, Datacoms, Wireless, IoT
Designed to facilitate the continued evolution of high-frequency wireless systems in various market segments, the new DB0402 3dB 90° hybrid couplers provide repeatable high-frequency performance compatible with automated assembly.

Read more...
Next-level Software Defined Radio
IOT Electronics Telecoms, Datacoms, Wireless, IoT
Great Scott Gadgets has announced the HackRF Pro, a powerful evolution of its popular Software Defined Radio (SDR) platform designed for engineers and enthusiasts.

Read more...
High-performance Zigbee and BLE module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The KCMA32S from Quectel boasts an ARM Cortex-M33 processor with a frequency of up to 80 MHz, and supports Zigbee 3.0, BLE 5.3 and BLE mesh.

Read more...
Championing local PCB manufacturing
Master Circuits Telecoms, Datacoms, Wireless, IoT
Master Circuits, founded in 1994 by Peter Frankish in Durban, was born from the vision to meet the growing local demand for quick-turnaround printed circuit boards in South Africa.

Read more...
How IoT-driven smart data helps businesses stay ahead
Trinity IoT Telecoms, Datacoms, Wireless, IoT
With around 19 billion IoT devices globally, embedded in everything from machinery to vehicles to consumer products, reliable data is plentiful.

Read more...
IoT-optimised LTE Cat 1 bis module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel’s EG915K-EU is an LTE Cat 1 bis wireless communication module specially designed for M2M and IoT applications.

Read more...
Chip provides concurrent dual connectivity
EBV Electrolink Telecoms, Datacoms, Wireless, IoT
The IW693 from NXP is a 2x2 dual-band, highly integrated device that provides concurrent dual Wi-Fi 6E + Wi-Fi 6 and Bluetooth connectivity, supporting four different modes.

Read more...
The 6 GHz band radio solution
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Analog Devices’ 16 nm transceiver family offers a highly integrated solution for this new frequency band, featuring low power consumption and high performance.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved