DSP, Micros & Memory


Low-noise chip-scale atomic clock

28 February 2025 DSP, Micros & Memory

Developers need ultra-clean timing devices for aerospace and defence applications where SWaP constraints are critical. A Chip-Scale Atomic Clock (CSAC) is an essential reference for these systems, providing the necessary precise and stable timing where traditional atomic clocks are too large or power-hungry and where other satellite-based references may be compromised. Microchip Technology has announced its second generation Low-Noise Chip-Scale Atomic Clock (LN-CSAC), model SA65-LN, in a lower profile height and designed to operate in a wider temperature range, enabling low phase noise and atomic clock stability in demanding conditions.

Microchip has developed its own evacuated miniature crystal oscillator (EMXO) technology and integrated it into a CSAC, enabling the model SA65-LN to offer a reduced profile height of less than half an inch, while maintaining a power consumption of less than 295 mW. Operating within a wider temperature range of -40 to 80°C, the new LN-CSAC is designed to maintain its frequency and phase stability in extreme conditions for enhanced reliability.

The LN-CSAC combines the benefits of a crystal oscillator and an atomic clock in a single compact device.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

High performance SDR design considerations
RFiber Solutions Editor's Choice DSP, Micros & Memory
As the spectrum gets increasingly crowded, and adversaries more capable, the task of examining wide bands and making sense of it all, while not missing anything, gets harder.

Read more...
Direct RF converters and FPGAs boost EW applications
RFiber Solutions DSP, Micros & Memory
The latest boost to electronic warfare designs comes from emerging FPGA architectures that combine advanced RF converters and high-performance processing engines in a single package.

Read more...
1-Wire EEPROM with secure authenticator
Altron Arrow DSP, Micros & Memory
The DS28E54 secure authenticator combines FIPS 202-compliant secure hash algorithm (SHA-3) challenge and response authentication with secured electrically erasable programmable read-only memory.

Read more...
Microchip enhances digital signal controller lineup
Future Electronics DSP, Micros & Memory
Microchip Technology has added the dsPIC33AK512MPS512 and dsPIC33AK512MC510 Digital Signal Controller families to its dsPIC33A DSC product line.

Read more...
MCX C Series development board
Avnet Silica DSP, Micros & Memory
The FRDM-MCXC444 is a compact and scalable development board for rapid prototyping of MCX C444 MCU from NXP Semiconductors.

Read more...
Redefining entry-level MCUs
NuVision Electronics DSP, Micros & Memory
The company positions the GD32C231 series as a ‘high-performance entry-level’ solution designed to offer more competitive options for multiple applications.

Read more...
Cutting-edge hybrid capacitors
Avnet Silica Passive Components
Panasonic Industry recently announced the launch of the ZVU Series Hybrid Capacitors, a cutting-edge solution tailored to meet the escalating demands of advanced electronic systems.

Read more...
Microchip enhances TrustMANAGER platform
Altron Arrow DSP, Micros & Memory
Firmware over-the-air updates and remote cryptographic key management provide scalable solutions for addressing IoT security challenges.

Read more...
MCU for low-power, IoT applications
NuVision Electronics DSP, Micros & Memory
Silicon Labs recently announced the PG26, a general-purpose microcontroller with a dedicated matrix vector processor to enhance AI/ML hardware accelerator speeds.

Read more...
EEPROMs for industrial and military markets
Vepac Electronics DSP, Micros & Memory
Designed to ensure the data retention and the secure and safe boot of digital systems, the memory product line includes small and medium density EEPROMs from 16 kb to 1 Mb.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved