Editor's Choice


Is it time for Wi-Fi 7 in SA?

27 November 2025 Editor's Choice Telecoms, Datacoms, Wireless, IoT

Wi-Fi 7, the IEEE 802.11be standard also known as Extremely High Throughput, is the next-gen wireless networking standard after Wi-Fi 6 and 6E. It is designed to dramatically improve speed, latency, efficiency, and reliability, especially in areas with many connected devices or demanding use cases like AR/VR or 8K multimedia streaming.

Key features of Wi-Fi 7

Improvements over Wi-Fi 6 are detailed in Table 1.

Doubling the channel width up to 320 MHz provides a massive increase in bandwidth providing a huge boost to data throughput. Simultaneously, having higher 4K QAM modulation allows more data to be packed into each transmission, further increasing the throughput by another ~25%.

Multi-Link Operation (MLO) means that devices can now connect over multiple bands simultaneously, providing a faster and more reliable link with seamless switching should one of those bands become congested. Wi-Fi 7 also has the ability to use a partially-free channel instead of waiting for a complete channel to become available. This feature, known as Multi-Resource Unit Puncturing, will provide better performance in noisy spectrum environments.

Wi-Fi 7 also provides Multi-AP Coordination which allows multiple routers/APs to collaborate providing smarter mesh performance and better network efficiency.

The big question: Is it time to upgrade?

Currently, adopting the Wi-Fi 7 standard is a very expensive exercise. Hardware is still very expensive compared to Wi-Fi 5 and Wi-Fi 6 installations. Secondly, most client devices do not yet support Wi-Fi 7 and to obtain a real benefit from the standard requires both ends to support it.

Upgrading to Wi-Fi 7 expecting an increase in the signal range is fool’s gold. Higher frequencies have lower penetration power so improvements to throughput will be limited to the user’s immediate surroundings.

For most users (web-browsing, streaming Netflix, online video meetings, etc.), the improvements will not be noticeable. Unless users are already on a multi-gigabit fibre link or are accessing local high-speed networking devices (transferring large volumes of data, for example), the experience will be the same as using a Wi-Fi 6 link.

So, upgrading should only be considered if your use-case is cloud gaming, AR/VR applications, or you are adding more devices to a network that already hosts 30+ devices. For other uses, Wi-Fi 6 will be more than sufficient.

Lastly, spectrum allocation is a sore point in South Africa. The government has been promising to make spectrum available ever since the country’s broadcast digital migration was announced and was initially set for November 2011. Fourteen years on and the country is still dragging its feet even though, in May 2023, ICASA amended its regulations to allow use of the lower 6 GHz band for Wi-Fi applications, specifically from 5925 – 6425 MHz.

Although certain local stakeholders have requested that ICASA extend the spectrum allocation to allow the full benefit of Wi-Fi 7’s capabilities, there is considerable push-back from mobile operators wishing to use it for mobile/5G/6G communication. The latest Draft National Radio Frequency Plan 2025 was published in April 2025 for public consultation with industry and advocacy groups continuing to push for the upper 6 GHz band to be opened for license-exempt use.

For now, the upper portion of the 6 GHz band from 6425 – 7125 MHz remains unavailable, which limits how many wide 320 MHz channels can be formed.

The partial opening of the 6 GHz band is a positive step, but until the full spectrum is made available, the theoretical gains of implementing a Wi-Fi 7 network will be hampered in South Africa. Holding off on upgrading networking infrastructure may be prudent in the short term until such time as the full spectrum is available, and hopefully by then Wi-Fi 7 equipment will demand a lower price point.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Engineering in a world that cannot assume connectivity
Technews Publishing Editor's Choice News
Across industrial automation, networking, and defence systems, engineers are rediscovering the importance of resilience and autonomy in an increasingly connected world.

Read more...
Designing IoT devices for deterministic LPWAN environments
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Built on Ultra Narrow Band communication technology, the Sigfox network focuses on low power, wide area M2M connectivity rather than maximising data throughput.

Read more...
Driving excellence in electronics manufacturing
Jemstech Editor's Choice Manufacturing / Production Technology, Hardware & Services
Jemstech’s reputation for disciplined execution and client-focused service has earned it strong loyalty from companies operating in demanding industries.

Read more...
In sync with the line
Testerion Editor's Choice Manufacturing / Production Technology, Hardware & Services
In modern SMT lines, stencil printing must meet two requirements at the same time: it has to ensure a reproducible solder paste volume, while adhering to the specified line cycle time.

Read more...
Resilient navigation in warfare: The role of non-GNSS
Etion Create Editor's Choice
Alternative navigation methods are essential for maintaining operational capability when satellite signals are unreliable or unavailable.

Read more...
Quectel’s RG255C-NA and RM255C-GL accelerate 5G RedCap adoption
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
Quectel’s RG255C-NA and RM255C-GL modules represent a strategic move into this fast-growing segment, delivering Sub-6 GHz 5G connectivity optimised for mid-tier IoT applications.

Read more...
SDRs – Which RF architecture should you choose?
RFiber Solutions Editor's Choice Telecoms, Datacoms, Wireless, IoT
There are several common methods of implementing SDR architectures. This paper discusses which is best when meeting a specific need.

Read more...
Surviving the extremes: Understanding shock and vibration in MEMS sensors
Altron Arrow Editor's Choice Test & Measurement
By considering factors such as mechanical headroom, damping, and system-level robustness, designers can ensure that the chosen sensor not only survives, but performs reliably over time.

Read more...
A two-stage approach to super-wide input voltage range DC-DC converters
RFiber Solutions Editor's Choice
Teaser: In addition to handling the various input voltage ranges required, the SynQor line of InQor DC-DC converters are fully encased and ruggedised to handle the harsh environments that often accompany systems that have such challenging technical requirements.

Read more...
From the editor's desk: Engineering the future
Technews Publishing Editor's Choice
As we welcome the first issue of Dataweek in a new year, it is an exciting time to be part of the electronics community, especially for our readers. The pace of change across our industry continues to accelerate, reshaping how we design, build, and interact with technology.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved