Telecoms, Datacoms, Wireless, IoT


PCIe 2.0 packet switches

29 January 2020 Telecoms, Datacoms, Wireless, IoT

Diodes Incorporated announced the PI7C9X2G304EVQ and PI7C9X2G404EVQ PCIe 2.0 packet switches, offering 3-ports/4-lanes and 4-ports/4-lanes, respectively. The packet switches are automotive-compliant for use in telematics/ADAS, navigation systems, in-vehicle wireless routers, and emerging applications such as V2V and V2X communications.

The parts are designed to provide a simple solution to increase the fan-out of PCIe ports on SoCs, ASSPs, MPUs and FPGAs, supporting advanced features in the automotive industry. The devices are qualified to AEC-Q100 Grade 2, offer an operating temperature range of -40°C to +105°C, are PPAP capable, and are manufactured in IATF 16949 certified facilities.

Interoperability at the system level is guaranteed through compliance with the PCI-SIG PCIe Rev 2.1 standard. At the component level, pin-compatibility with existing Grade 3 solutions from Diodes Incorporated provides an easy migration path to higher performance for existing designs.

Advanced features include an integrated clock buffer and support for peer-to-peer traffic, delivering greater system performance. The low-power operation is complemented by link power management, including active-state power management L0 and L1, device-state power management D0, D3Hot and D3Cold. Power dissipation in L0 is 300 mW (typical), dropping to 35 mW in PCI-PM L1.1 D3Hot PM sub-state mode.

Latency for a packet running through the switch without blocking is 150 ns, and latency tolerance reporting improves platform power management. While the default mode is cut-through, store and forward modes are also supported. Peer-to-peer traffic is enabled through access control service support.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Mobile satellite connectivity available in SA
Telecoms, Datacoms, Wireless, IoT
Space42 has commercially launched its next generation mobile satellite service, Thuraya 4 NGS, available in South Africa as of February 2026.

Read more...
Next-gen Wi Fi 6E connectivity for embedded systems
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems has expanded its connectivity portfolio with the introduction of the ESP32-E22, the company’s first Wi-Fi 6E connectivity co-processor.

Read more...
Quectel redefines connectivity with RG660Qx 5G Series
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Purpose-built to meet the demands of next-generation IoT and wireless broadband, these modules leverage the cutting-edge Qualcomm X85 and X82 5G Modem-RF systems to deliver enterprise-grade performance.

Read more...
NXP has expanded its MCX A Series
Altron Arrow AI & ML
NXP has significantly expanded its MCX A Series of Arm Cortex-M33 microcontrollers, doubling the portfolio with six new families aimed at industrial and IoT edge applications.

Read more...
Contactless IO-Link couplers
IOT Electronics Telecoms, Datacoms, Wireless, IoT
The IO-Link couplers from Phoenix Contact are industrial contactless couplers designed to transmit power and IO-Link data across a small air gap without physical connectors.

Read more...
Quectel’s RG255C-NA and RM255C-GL accelerate 5G RedCap adoption
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
Quectel’s RG255C-NA and RM255C-GL modules represent a strategic move into this fast-growing segment, delivering Sub-6 GHz 5G connectivity optimised for mid-tier IoT applications.

Read more...
SDRs – Which RF architecture should you choose?
RFiber Solutions Editor's Choice Telecoms, Datacoms, Wireless, IoT
There are several common methods of implementing SDR architectures. This paper discusses which is best when meeting a specific need.

Read more...
Multi-band GNSS patch antenna
RF Design Telecoms, Datacoms, Wireless, IoT
The Taoglas AHP2356A is a compact, high-performance active GNSS patch antenna designed for next-generation positioning systems requiring precision, reliability, and multi-constellation support.

Read more...
Cellular routers for explosive areas
Phoenix Contact Telecoms, Datacoms, Wireless, IoT
Updated versions of the Cellulink outdoor cellular router product range from Phoenix Contact are now available; they have been specially developed for use in Zone 2 potentially explosive areas.

Read more...
Power the next wave of IoT innovation
Links Field Networks Telecoms, Datacoms, Wireless, IoT
Links Field Networks’ portfolio includes connectivity platforms, edge devices, and network management tools designed to support secure, resilient IoT deployments across a range of use cases.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved