Smart Home Automation


Wireless button enables connected home control

26 February 2020

Shortcut Labs’ Flic 2 button enables a user to trigger functions on their Bluetooth 4.0 (and later) smartphone or tablet, as well as any connected smart devices, with the press of a button, and without the need to access individual apps or provide voice commands. The addition of the Internet-connected Flic Hub LR means the buttons can be triggered by anyone in the absence of the primary user’s smartphone.

In operation the buttons are paired to a Bluetooth 4.0 (and later) smartphone or tablet using Bluetooth LE wireless connectivity provided by Nordic Semiconductor’s nRF52811 Bluetooth 5/Bluetooth Low Energy (Bluetooth LE) multiprotocol System-on-Chip (SoC). From the smartphone’s iOS or Android Flic app the user can customise each button to perform different actions based on three different triggers: a ‘push’, a ‘double push’, and a ‘hold’. For example, pushing the button once could turn on/off smart lights, pushing the button twice could play music from a smart speaker, while holding the button down could automatically trigger a smart power switch to start brewing coffee in the morning.

There are over 1000 compatible devices and services available via the Flic app, as well as integrations with services including IFTT (if this then that), Microsoft Flow, and Zapier that enable users to create advanced action flows based on a single trigger. “The nRF52811 SoC running our proprietary code can handle 64 simultaneous connections and the Bluetooth 5 Long Range feature gives us very impressive range,” explains Shortcut Labs’ Amir Sharifat. “Latency has been optimised to the point that for local control of a lightbulb or doorbell, for example, the response is basically instant. The nRF52811’s battery life, radio features, and price were also attractive, while the technical documentation provided during development was helpful.”

The Flic Hub LR is an optional accessory to Flic and eliminates the need to connect the buttons to the smartphone. From early 2020 the hub will integrate Apple HomeKit capability, enabling buttons to be configured in the Apple Home app to control everything in the user’s Apple Home ecosystem. The Flic Hub LR also offers an infrared accessory enabling legacy control of TV and home entertainment systems.

The 8,5 by 30 mm Flic 2 button can be adhered to any surface with a reusable suction cup or fitted in a rigid metal clip that can be mounted to a keyring or worn as a wearable. The nRF52811 SoC’s Bluetooth 5 Long Range capability provides the button with line-of-sight range up to 200 m, and an indoor range of 50 m.

Flic 2 is powered by a replaceable CR2032 coin cell battery, providing a battery life of up to three years in standard operation between replacement, thanks in part to the ultra-low operating characteristics of the Nordic SoC. The nRF52811 has been engineered to minimise power consumption with features such as the 2,4 GHz radio’s 4,6 mA peak Rx/Tx currents and a fully automatic power management system that reduces power consumption by up to 80 percent compared with Nordic’s nRF51 Series SoCs.

Nordic’s nRF52811 multiprotocol SoC is a fully-featured connectivity solution that supports Bluetooth 5.1 Direction Finding, which brings precise positioning capability to the SoC in addition to all the features of Bluetooth 5 (including Bluetooth Long Range, 2 Mbps raw data bandwidth, and enhanced coexistence capabilities). The nRF52811 combines a 64 MHz, 32-bit Arm Cortex M4 processor, with a 2,4 GHz multiprotocol radio (supporting Bluetooth 5.1 Direction Finding, Bluetooth 5, Thread, Zigbee, IEEE 802.15.4, and proprietary 2,4 GHz RF protocol software) featuring 4 dBm output power with -97 dBm sensitivity (at 1 Mbps in Bluetooth 5 mode), and 192 KB Flash memory plus 24 KB RAM.

The nRF52811 SoC is supplied with Nordic’s S112 SoftDevice, a Bluetooth 5-certified RF software protocol stack for building advanced Bluetooth LE applications. The S112 SoftDevice features Central, Peripheral, Broadcaster and Observer Bluetooth LE roles and enables concurrent role operation.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

GNSS chipset for wearables
RF Design Telecoms, Datacoms, Wireless, IoT
The UBX-M10150-CC from u-blox is a GNSS chip that supports GPS, QZSS/SBAS, Galileo, and BeiDou constellations, and is designed for integration into wearable applications.

Read more...
X-band radar
RF Design Editor's Choice Telecoms, Datacoms, Wireless, IoT
X-band radar systems, particularly those leveraging beamforming ICs (BFICs), advanced gallium nitride (GaN) and gallium arsenide (GaAs) components, are leading the way in providing the high-performance radar capabilities required for modern defence and surveillance.

Read more...
GNSS antenna redefining what’s possible
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox has achieved what was once thought impossible with the launch of the DAN-F10N, the industry’s smallest and most reliable L1, L5 dual-band GNSS antenna module.

Read more...
u-blox expands NORA-B2 BLE modules
RF Design Telecoms, Datacoms, Wireless, IoT
The new nRF54L chipset-based wireless modules reduce current consumption and double processing capacity, catering to diverse mass market segments.

Read more...
New GNSS passive patch antenna
RF Design Telecoms, Datacoms, Wireless, IoT
The HP24510A from Taoglas is a stacked patch GNSS passive antenna that operates from 1215 to 1610 MHz covering the L1/L2 GNSS spectrum.

Read more...
6 – 18 GHz driver amplifier
RF Design Telecoms, Datacoms, Wireless, IoT
The QPA0022D from Qorvo is a high-performance driver amplifier covering a range of 6 to 18 GHz and fabricated on Qorvo’s production 0,15 µm pHEMT process.

Read more...
3,75 GHz RF inductor
RF Design Passive Components
The ceramic chip wire wound inductor from Coilcraft features a DC resistance of 1 O, a DC current of 175 mA, and a self-resonant frequency of 3,75 GHz.

Read more...
IoT in a Box
RF Design Telecoms, Datacoms, Wireless, IoT
RAKwireless and Datacake have collaborated on a solution called ‘Real IoT in a Box’ to address the complexities of deploying IoT solutions, particularly when it comes to LoRaWAN.

Read more...
Direction-finding antenna board
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox’s ANT-B11 Bluetooth 5.1 direction-finding antenna board is a compact Bluetooth Low-Energy angle-of-arrival antenna and sensor board combined.

Read more...
DC to 40 GHz termination
RF Design Enclosures, Racks, Cabinets & Panel Products
The TS400HM from Inmet by Spectrum Control is a 50 O termination that operates from DC to 40 GHz, and can handle an average input power of 1 W.

Read more...