Telecoms, Datacoms, Wireless, IoT


LTE Cat.1 module for single-antenna reception

25 November 2020 Telecoms, Datacoms, Wireless, IoT

Telit’s LE910S1-EA, a new LTE Cat. 1 module with single antenna, is designed for IoT applications in the EMEA and APAC regions that need a combination of performance, affordability, voice support, 2G fallback, optional GNSS location and a compact form factor. The module is ideal for tracking devices and other mobile IoT applications that need to maintain a reliable connection across multiple operators in a country, region or multiple regions.

The LE910S1-EA supports LTE Cat.1 with single-antenna reception, with downlink speeds of up to 10 Mbps and up to 5 Mbps uplink. This streamlined configuration helps the LE910S1-EA significantly reduce cost and complexity compared to LTE Cat. 1 devices with two antennas. Mobile operators worldwide plan to continue supporting LTE long after they have deployed 5G. LTE Cat. 1 is also ideal for IoT deployments in regions where the new 3GPP low power wide area (LPWA) technologies are not yet available.

The new module supports 2G fallback, making it ideal for applications that require full mobility throughout the EMEA and APAC regions – including areas that have not upgraded to 4G yet. It also supports both circuit-switched voice and VoLTE (Voice over LTE) for those applications that require making phone calls, like alarm panels, connected elevators, and healthcare mobile personal emergency response systems (mPERS). An optional embedded GNSS receiver makes it an ideal all-in-one solution for tracking use cases where highly precise, faster-refreshing, satellite-based positioning and navigation must complement cellular-based positioning.

The LE910S1-EA is the latest member of Telit’s flagship xE910 module family, whose unified form factor, electrical and programming interfaces span 2G, 3G and 4G products. This heritage enables developers to implement a

‘design once, use anywhere’ strategy. One example is quickly porting their existing designs to the LE910S1-EA to pursue new market opportunities in the EMEA and APAC regions.

For more information contact Renaldo Fibiger, Altron Arrow, +27 11 923 9600, rfibiger@arrow.altech.co.za, www.altronarrow.com


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Dual-band GNSS RTK module
31 March 2021, Electrocomp , Telecoms, Datacoms, Wireless, IoT
The RTK-1010 is a high-performance dual-band GNSS RTK module that is designed for applications requiring centimetre-level positioning accuracy. It adopts a 12 nm manufacturing process and integrates an ...

Read more...
Component shortages and how to mitigate them
31 March 2021, RS Components (SA), Projects Concern Manufacturing, Production Logix, Altron Arrow , News
To find out just how severe the problem is right now, and the impact it is having, we consulted two South African CEMs and two component distributors for their insights and advice.

Read more...
Development kit supporting Espressif’s Alexa Connect Kit
31 March 2021, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
Espressif Systems announced the launch of its new development kit, the ESP32-PICO-V3-ZERO-DevKit, which uses the Alexa Connect Kit (ACK) module announced by Espressif in July 2020. Both this module and ...

Read more...
Bidirectional logic-level voltage translators
31 March 2021, Altron Arrow , Analogue, Mixed Signal, LSI
The 74LVC2T45 and 74LVCH2T45 from Diodes Incorporated provide logic-level voltage translation between devices that operate from different supply rails. The devices have dual power supplies and support ...

Read more...
Multi-constellation GNSS module
31 March 2021, Altron Arrow , Telecoms, Datacoms, Wireless, IoT
Telit’s high-precision GNSS SE868SY-D is a new multi-frequency, multi-constellation positioning receiver capable of combining GPS/QZSS and Galileo in the L1/E1 and L5/E5 bands, GLONASS in the L1, BeiDou ...

Read more...
S-band low-noise amplifier
31 March 2021, RFiber Solutions , Telecoms, Datacoms, Wireless, IoT
The MAAL-011138 from MACOM Technology Solutions is a high dynamic range, single-stage MMIC LNA (low-noise amplifier) designed to operate from 2,5 GHz to 3,5 GHz, and is assembled in a lead-free, 2 mm ...

Read more...
Evaluate 3D magnetic sensors in under ten minutes
31 March 2021, Altron Arrow , Analogue, Mixed Signal, LSI
You probably think that it’s not possible to evaluate a 3D magnetic sensor in less than ten minutes? Think again! Anything is possible with Infineon’s 2GO kits. Its 3D magnetic sensor 2GO kit is a budget-priced ...

Read more...
Reflective SP4T RF switch
26 February 2021, RFiber Solutions , Telecoms, Datacoms, Wireless, IoT
The AM6032 is a reflective single-pole four-throw (SP4T) switch covering the DC to 26,5 GHz frequency range suited for a wide range of wireless applications. The AM6032 provides low insertion loss, flat ...

Read more...
New range of double ridge waveguide components
26 February 2021, RF Design , Telecoms, Datacoms, Wireless, IoT
Pasternack has unveiled a new series of double ridge waveguide components that are ideal for satellite communication, radar, wireless communication and test and instrumentation. The new components ...

Read more...
LTE Cat. 1 wireless module
26 February 2021, Otto Wireless , Telecoms, Datacoms, Wireless, IoT
SIMCom’s SIM7600 series is an LTE Cat. 1 module which supports wireless communication modes LTE-TDD, LTE-FDD, HSPA+, GSM/GPRS/EDGE, and others. It supports a maximum 10 Mbps downlink rate and 5 Mbps uplink ...

Read more...