Computer/Embedded Technology


CompactPCI Serial to PCI Express card adaptor

23 June 2021 Computer/Embedded Technology

EKF’s SA4-Country is a peripheral slot board for PICMG CompactPCI Serial systems and acts as a carrier for a low-profile PCI Express (PCIe) card. The board is endowed with a PCIe x8 connector (optionally x4 or x1) and accommodates a PCIe card with maximum dimensions of 176 mm (length) x 68,9 mm (height). Covered by a metallic shell, the PCI Express card protrudes slightly from the front panel, for optimum board space utilisation.

The SA4-Country is equipped with the backplane connectors P1/P2 for support of up to eight PCI Express lanes when inserted into a CompactPCI Serial fat pipe slot. For the x1 or x4 options, only P1 is required. For optimum signal integrity, PCI Express Gen 3 redrivers are provided on-board, in addition to a clock buffer. As an option, a 50 mm axial fan can be mounted on the bottom side for forced airflow under demanding conditions.

Typical applications comprise easy system integration of special functions not yet available in CompactPCI Serial board format, system integration of proprietary hardware, integration of third-party IP (e.g. FPGA-based solutions with proprietary software) and as a rapid solution for prototyping systems and small-volume applications.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Rugged, I/O-rich NVIDIA Jetson solutions
Electronic Products Design Computer/Embedded Technology
Developed for the NVIDIA Jetson AGX Orin, the Osbourne carrier and development kit is a compact and rugged platform designed to support a wide range of embedded AI and edge computing applications.

Read more...
New generation of SBCs
Computer/Embedded Technology
HardKernel’s new generation of ODROID H4-series SBCs are more powerful; offering higher performance and richer interfaces than previous generations.

Read more...
Smallest 13th gen Intel SBC
Vepac Electronics Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.

Read more...
Versatile PoE extender
Vepac Electronics Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.

Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...
QuecPi smart development board
iCorp Technologies Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.

Read more...
Eskom announces PV registration extension
Computer/Embedded Technology
The South African Photovoltaic Industry Association has welcomed Eskom’s decision to extend its zero-registration fee policy and free smart meter installation for residential Small-Scale Embedded Generation customers until March 2026.

Read more...
Unlock enhanced wireless performance
Computer/Embedded Technology
Duxbury Networking has introduced Cambium Networks’ Deep Virtual Circuit (Deep VC) technology, a free upgrade for the PMP 450 platform that will transform wireless broadband performance across the country.

Read more...
Embedded module for AI vision applications
Rugged Interconnect Technologies DSP, Micros & Memory
The TQMa95xxSA supports AI/ML with vision applications through an integrated NPU and an image processor unit.

Read more...
A new era in modular I/O solutions
Rugged Interconnect Technologies Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved