The SCM3721ASA and SCM3723ASA belong to a family of digital isolators based on unique capacitive pulse isolation technology. Capacitive pulse isolation is a new-generation digital isolator technology that uses the principle of a capacitive voltage divider to transmit a signal directly across the isolator capacitor without signal modulation and demodulation.
Compared to traditional optocoupler technology, Mornsun’s capacitive pulse isolation technology, in combination with mature CMOS technology, lends itself to the simplification of circuit designs and consequently improved device performance, such as lower power consumption, faster speed, enhanced anti-interference capability and lower noise.
The SCM3721ASA and SCM3723ASA isolators’ data channels are independent and are available in a variety of configurations with a withstand voltage rating of 1,5 kVrms to 3,0 kVrms and a data rate from DC up to 10 Mbps. The input/output design techniques permit logic and supply voltages from 3,0 V to 5,5 V, offering voltage translation of 3,3 V and 5 V logic. The architecture is designed for high common-mode transient immunity and high immunity to electrical noise and magnetic interference.
High-current feedthrough filters 25 August 2021, Conical Technologies
, Circuit & System Protection
HPR Series feedthrough filters from NexTek are designed and built to provide rugged EMI filtering for high-current lines, no matter the application details or environmental requirements. These feedthrough ...
Read more...Compact X2 capacitors for noise suppression 25 August 2021, Electrocomp
, Circuit & System Protection
A new series of very compact EPCOS X2 capacitors for noise suppression, rated for 275 V a.c. and covering a capacitance range from 33 nF to 1 µF, has been released by TDK. Depending on the capacitance ...
Read more...Clearing the Static: ESD clothing and footwear 25 August 2021, Altico Static Control Solutions
, Circuit & System Protection
While working in an electrostatic protected area (EPA), ESD clothing is necessary to make sure that people do not charge the products they are working with. ESD footwear and clothing prevent static charge ...
Read more...2-30 GHz medium-power amplifier 25 August 2021, Conical Technologies
, Telecoms, Datacoms, Wireless, IoT
The Mini-Circuits ZVA-02303HP+ is a coaxial, medium-power, wideband and high-gain amplifier operating from 2 GHz to 30 GHz. The model operates over a single positive supply range of +12 to +15 V, allowing ...
Read more...1 A buck regulator with wide input range 25 August 2021, Conical Technologies
, Power Electronics / Power Management
The SCM1301A step-down (buck) regulator is a new addition to Mornsun’s product lineup, with a very wide input range of 4,5 V to 40 V d.c. It is suitable for a wide range of applications from industrial ...
Read more...Battery simulation test solution 25 August 2021, Conical Technologies
, Test & Measurement
With the development of battery technology, battery weight and energy density are being further improved while their cost is reducing, making batteries widely used in new energy vehicles, photovoltaic ...
Read more...Thermoelectric coolers for optoelectronic systems 25 August 2021, TRX Electronics
, Circuit & System Protection
Featuring next-generation thermoelectric materials, the OptoTEC OTX/HTX Series of thermoelectric coolers from Laird Thermal Systems offers a 10% boost in cooling capacity, greater temperature differential ...
Read more...Common-mode filters for mobile devices 25 August 2021, Electrocomp
, Circuit & System Protection
TDK has developed the TCM0403M Series of miniaturised thin-film common-mode filters for mobile devices. The 0403 case size (0,457 x 0,3 x 0,23 mm) is 58% smaller and 56% lighter than previous products. ...
Read more...RF-over-fibre transceiver for C- and X-band 25 August 2021, Conical Technologies
, Telecoms, Datacoms, Wireless, IoT
Emcore has released the latest in its range of RF-over-fibre transceivers covering C-band through to X-Band. The MAKO-X C/X-Band transceiver is designed for high-speed fibre-optic communication applications ...
Read more...Fast-acting chip fuse for automotive applications 25 August 2021, Altron Arrow
, Circuit & System Protection
Vishay introduced a new, very fast-acting thin film chip fuse. For automotive applications, the Vishay Beyschlag MFU 0603 AT is AEC-Q200 qualified and features current ratings from 0,5 A to 5,0 A.
...
printer friendly version