Quectel Wireless Solutions has expanded its antenna portfolio with four rugged multi-network combo antennas. By combining cellular, Wi-Fi and GNSS technologies in single IP67-rated housings with high inter-antenna isolation, the new antennas reduce multiple installations – each with its own hole, cable run and potential point of failure – to just one.
At the entry point, the YEMA206J1AM is a 2-in-1 adhesive mount antenna combining 4G (698 to 960 MHz and 1710 to 2690 MHz) with GNSS, supported by a low-noise amplifier providing approximately 16 dB of gain. With backward compatibility for 3G and 2G as well as LTE Cat-M and NB-IoT, and compatibility with modules such as Quectel’s RM520x series, it is well suited to asset tracking and remote monitoring devices.
The YEMA301J1AM steps up to a 3-in-1 adhesive mount configuration with dual 4G antennas plus GNSS. High isolation between the elements minimises self-interference, and 4G efficiency reaches up to 73,2% – making it a strong fit for fleet management and telematics installations where MIMO performance matters.
For high-speed connectivity, the YEMN308L1BM is a 3-in-1 screw mount antenna combining 5G (698 to 960, 1420 to 2690 and 3300 to 6000 MHz), Wi-Fi across the 2,4, 5 and 6 GHz bands, and GNSS with an LNA of approximately 18 dB. It is RoHS and REACH compliant and targets routers, gateways and mobile broadband equipment.
Topping the range, the YENA00L5AH is a 10-in-1 screw mount antenna providing ultra-wide-band coverage from 1 to 7000 MHz. It integrates dual 5G, dual Wi-Fi, AM/FM, dual Tetra, LTE Band 88 and active GNSS (L1/L5) elements in a single flame-retardant, UV-resistant housing – built for connected vehicles, public safety fleets and advanced industrial deployments where every wireless service must share one roof penetration.
Wireless connectivity expanded iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Espressif Systems has introduced two new members of its ESP32 wireless SoC family: the ESP32-E22, the company’s first Wi-Fi 6E connectivity chip, and the ESP32-H21, an ultra-low-power Bluetooth LE microcontroller aimed at coin-cell and battery-powered devices.
Read more...From idea to intelligent product TRX Electronics
Computer/Embedded Technology
Mouser Electronics has announced a new eBook in collaboration with Arduino – From Blink to Think: How Arduino UNO Q Helps Designers Go from Idea to Intelligent Product.
Read more...Quectel expands 5G portfolio iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Quectel expands 5G portfolio with new Qualcomm- and UNISOC-based modules.
Read more...Think Diamond Long-life COM-based SBCs Electronic Products Design
Computer/Embedded Technology
A COM-based SBC combines the flexibility of a standard computer-on-module (COM) with a baseboard offering additional I/O, expansion sockets, power supplies, and I/O connectors. The result is a highly flexible, highly expandable, feature-dense product that can be adapted to the widest range of applications, offering maximum product lifetime.
Read more...Next-Gen Min-ITX motherboard Vepac Electronics
Computer/Embedded Technology
Adding to AAEON’s extensive industrial motherboard portfolio, the Next-Gen MIX-Q870A1 is the company’s most advanced Mini-ITX board to date.
Read more...Rev 2.0 PolarFire FPGA ethernet sensor bridge Altron Arrow
Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.
Read more...Compact RTK design: More than just the receiver iCorp Technologies
Editor's Choice Telecoms, Datacoms, Wireless, IoT
In practice, engineers building compact RTK products keep discovering the same thing: the hardest component in the system is no longer the receiver. It is the antenna.
Read more...Simplifying RS485 network design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Aipu Power has added the RS485-XXXSAV to its transceiver module range, a single-channel isolated RS485 transceiver that bundles power isolation, signal isolation, RS485 interface and bus protection into one drop-in module, aimed at simplifying RS485 network design in industrial equipment.
Read more...SGMICRO expands analogue IC portfolio iCorp Technologies
Passive Components Telecoms, Datacoms, Wireless, IoT
SGMICRO continues to add to its analogue IC portfolio at a steady pace, with new devices released across power protection, power conversion, current sensing and RF signal-chain categories.
Read more...Intelligent video processing Rugged Interconnect Technologies
Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version