Linear Technology’s LTC6362 is a low-power, fully differential amplifier that can drive high-precision 16- and 18-bit SAR ADCs at only 1 mA supply current. With 200 µV maximum input offset voltage and 3,9 nV/√Hz input-referred noise, it is well suited for precision industrial and data acquisition applications.
The IC has an output common-mode pin with a 0,5 V to 4,5 V range, and 18-bit settling time of 550 ns with an 8 VP-P output step, making it ideal for driving ADCs such as the LTC2379-18 in multiplexed input and control loop applications.
This 18-bit SAR ADC features digital gain compression, which sets its full-scale input range to 10% to 90% of the reference voltage. Together with the rail-to-rail output stage of the LTC6362, this feature eliminates the need for a negative supply rail, simplifying the circuit and minimising power consumption.
The flexible architecture of the LTC6362 can convert single-ended DC-coupled, ground-referenced signals to differential, or DC level shift differential input signals. Its low input bias current, low offset voltage and rail-to-rail inputs also enable the device’s use in a high-impedance configuration to interface directly to sensors early in the signal chain.
The LTC6362 is available in MSOP-8 and 3 x 3 mm DFN packages, with fully guaranteed specifications over the 0°C to 70°C, -40°C to 85°C and -40°C to
More room to scale Altron Arrow
Power Electronics / Power Management
With the latest STM32H5 lines from STMicroelectronics, you can now scale within the same platform, from a compact 1 Mbyte device to higher-memory MCUs for graphics-rich and feature-heavy designs.
Read more...Multi-constellation GNSS module in a legacy-compatible footprint Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Telit Cinterion has announced the SE869eK2L, a single-frequency L1 GNSS module designed to help device manufacturers upgrade legacy positioning designs with improved performance and cost efficiency, while preserving design continuity.
Read more...Compact SSI family for industrial automation Altron Arrow
Passive Components
Infineon Technologies has introduced the ISSI20BxxF Solid State Isolator (SSI) family, bringing solid-state isolation technology into high-volume applications traditionally served by photovoltaic isolators (PVIs), photovoltaic relays (PVRs), and electromechanical relays (EMRs).
Read more...Rev 2.0 PolarFire FPGA ethernet sensor bridge Altron Arrow
Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.
Read more...Universal IR receiver module Altron Arrow
Telecoms, Datacoms, Wireless, IoT
Vishay Intertechnology has introduced a new series of infrared (IR) receiver modules for IR remote control applications, which feature a wide modulation frequency acceptance from 30 kHz to 68 kHz.
Read more...Pickering Expands Analogue Output Portfolio
Analogue, Mixed Signal, LSI
Whether you are building a functional tester for the production line or an HIL test system, Pickering’s instrumentation offering delivers high channel density, reliable precision, and dependable long-term support
Read more...Low profile SMD antenna Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The Havok PCS.06.A antenna, from Taoglas, is a low profile SMD LTE/cellular 4G/3G/2G embedded antenna designed for direct SMD mount on a device PCB.
Read more...Accelerate development of physical AI deployments Altron Arrow
DSP, Micros & Memory
With Avocado OS now available on the HummingBoard RZ-V2N-
AIoT and SolidSense AIoT V2N from SolidRun, teams can move from prototype to deployed fleet in weeks.
Read more...Universal NFC device Altron Arrow
DSP, Micros & Memory
Delivering high-end performance in a compact 4 x 4 mm package, the multipurpose NFC reader from ST Microelectronics, enables the convenience of contactless interaction and features for various end applications.
Read more...Java Card-based solution Future Electronics
Analogue, Mixed Signal, LSI
The SECORA ID Key S USB, from Infineon Technologies, is a Java Card-based solution with USB and NFC connectivity for secured authentication and digital signatures.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version