New from Hittite are two 2 Watt GaAs pHEMT MMIC power amplifiers (PAs) which cover the 9 to 14 GHz frequency range and are ideal for microwave radio, military and space, SATCOM and test and measurement applications.
The HMC952 and the HMC952LP5GE are four-stage PAs with temperature-compensated on-chip power detectors which operate between 9 and 14 GHz. They provide 33 dB of gain, +35 dBm of saturated output power and 27% PAE (power added efficiency) from a +6 V supply.
With up to +43 dBm output IP3, the HMC952LP5GE is ideal for high-linearity applications in military and space, as well as high-capacity point-to-point and point-to-multipoint radios.
The amplifiers also feature I/Os that are internally matched to 50 Ω and require no external matching components, which makes them ideal for use as drivers, or as the final power stage in a microwave transmitter chain.
The HMC952 die may be easily incorporated into MCMs, while the HMC952LP5GE leadless QFN 5 x 5 mm surface mount packaged version is compatible with high-volume assembly equipment.
GNSS chipset for wearables RF Design
Telecoms, Datacoms, Wireless, IoT
The UBX-M10150-CC from u-blox is a GNSS chip that supports GPS, QZSS/SBAS, Galileo, and BeiDou constellations, and is designed for integration into wearable applications.
Read more...X-band radar RF Design
Editor's Choice Telecoms, Datacoms, Wireless, IoT
X-band radar systems, particularly those leveraging beamforming ICs (BFICs), advanced gallium nitride (GaN) and gallium arsenide (GaAs) components, are leading the way in providing the high-performance radar capabilities required for modern defence and surveillance.
Read more...A new era in modular I/O solutions Rugged Interconnect Technologies
Analogue, Mixed Signal, LSI
Aerospace and defence system designers are demanding scalable and high-performance I/O solutions and while traditional mezzanine standards have proven reliable, they often fall short of meeting modern bandwidth, size, and flexibility requirements.
Read more...GNSS antenna redefining what’s possible RF Design
Telecoms, Datacoms, Wireless, IoT
u-blox has achieved what was once thought impossible with the launch of the DAN-F10N, the industry’s smallest and most reliable L1, L5 dual-band GNSS antenna module.
Read more...High voltage instrument op-amp iCorp Technologies
Analogue, Mixed Signal, LSI
The SGM621B is a high accuracy, high voltage instrumentation amplifier, which is designed to set any gain from 1 to 10 000 with one external resistor.
Read more...u-blox expands NORA-B2 BLE modules RF Design
Telecoms, Datacoms, Wireless, IoT
The new nRF54L chipset-based wireless modules reduce current consumption and double processing capacity, catering to diverse mass market segments.
Read more...New GNSS passive patch antenna RF Design
Telecoms, Datacoms, Wireless, IoT
The HP24510A from Taoglas is a stacked patch GNSS passive antenna that operates from 1215 to 1610 MHz covering the L1/L2 GNSS spectrum.
Read more...High-speed SAR ADC simplifies design Altron Arrow
Analogue, Mixed Signal, LSI
The ADI AD4080 simplifies data converter integration by integrating a low drift reference buffer, low dropout regulators and a 16K result data FIFO buffer.
Read more...6 – 18 GHz driver amplifier RF Design
Telecoms, Datacoms, Wireless, IoT
The QPA0022D from Qorvo is a high-performance driver amplifier covering a range of 6 to 18 GHz and fabricated on Qorvo’s production 0,15 µm pHEMT process.
Read more...2-wire quad voltage output DAC Altron Arrow
Analogue, Mixed Signal, LSI
The DAC has a 2-wire serial interface that operates at clock rates up to 400 kHz, and this interface is SMBus compatible, allowing multiple devices to be placed on the same bus.
printer friendly version