DSP, Micros & Memory


Automotive multimedia processor

17 April 2013 DSP, Micros & Memory

Renesas Electronics has added a new member to its R-Car family of automotive SoCs. Capable of delivering more than 25 000 DMI/s, the R-Car H2 is designed to provide high-performance 3D graphics capabilities for high-end multimedia and navigation automotive systems. Media hardware accelerators enable features such as 4 x HD 1080 p video encoding/decoding including Blu-Ray support at 60 frames per second, image/voice recognition and high-resolution 3D graphics with almost no CPU load. The IC also features a PowerVR Series6 G6400 GPU from Imagination Technologies. Advanced automotive interfaces like Ethernet AVB, MOST-150 and CAN, as well as mass storage interfaces such as SATA, USB3.0/2.0, SDcard and PCI Express, are supported.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Cost-effective microcontroller series
Altron Arrow DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.

Read more...
Battery-friendly Thread and BLE solution
iCorp Technologies DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.

Read more...
Next generation HMI processing platform
Future Electronics DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.

Read more...
Real-time monitoring for smart power distribution
CST Electronics Test & Measurement
By leveraging high-precision measurement, high-speed wave-recording, and AI-enabled analytics, the InHand Wireless Overhead-lines System empowers power utilities to accurately identify line faults and perform comprehensive load analysis.

Read more...
Low-power SoC for IoT designs
iCorp Technologies DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.

Read more...
Chip for high-density power
Future Electronics DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.

Read more...
The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.

Read more...
Robust LoRaWAN for distributed IoT
CST Electronics Telecoms, Datacoms, Wireless, IoT
InHand Networks has unveiled its latest LoRaWAN gateway, the EC312, marking an evolution in industrial-grade connectivity solutions for distributed IoT environments.

Read more...
GigaDevice expands GD25UF Series density
NuVision Electronics DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.

Read more...
ARINC 429 line driver evaluation board
ASIC Design Services DSP, Micros & Memory
Holt Integrated Circuits have announced the release of the ADK-85104 Evaluation Board, a compact, ready-to-use platform designed to help engineers rapidly evaluate and characterise Holt’s HI-85104.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved