Passive Components


Broadband coaxial attenuators

1 May 2013 Passive Components

New from EMC Technology is the 42UW series of coaxial fixed attenuators, manufactured to meet the environmental requirements of MIL-DLT-3933. They offer enhanced attenuation accuracy and VSWR, with extended broadband frequency operation from DC to 26 GHz.

The attenuators are available in both commercial and high-reliability versions. The latter are offered with a standard test plan or up-screened to custom requirements. Their rugged construction ensures reliability and continuous performance in demanding environments. They are also REACH, RoHS and DFARS compliant.

These parts are offered in values from 0 to 20 dB in 0,5 dB increments and 20 to 30 dB in 1 dB increments. They are manufactured with a stainless steel body and standard SMA male/female interface.

For more information contact Andrew Hutton, RF Design, +27 (0)21 555 8400, sales@rfdesign.co.za, www.rfdesign.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Compact Bluetooth LE and Wi-Fi module
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox announces compact Bluetooth LE and Wi-Fi module which combines Wi-Fi 4 and Bluetooth 5.0 with a powerful open CPU.

Read more...
Tibbo powers cloud-enabled traceability systems
RF Design Telecoms, Datacoms, Wireless, IoT
The wireless nature of the WS1102 allows units (and attached barcode scanners) to be moved freely between workstations.

Read more...
2-way power divider
RF Design Telecoms, Datacoms, Wireless, IoT
The power divider is suitable for use in test and measurement, satcom, commercial, military and wireless communication applications.

Read more...
5 GHz Wi-Fi front-end module
RF Design Telecoms, Datacoms, Wireless, IoT
A key feature of the integrated logarithmic power detector is to enable power control across the entire power spectrum.

Read more...
Automatic gain-controlled amplifier
RF Design Telecoms, Datacoms, Wireless, IoT
The device is designed for rugged military environments and can be customised with an optional time delay adjustment and phase modulation compression.

Read more...
High-voltage power inductors
RF Design Passive Components
Coilcraft’s RFC0807BV Series power inductors are a high-voltage version of the RFC0807B Series. Their operating voltage is rated at 800 V, which is higher than comparable products in the market. They ...

Read more...
Fixed RF attenuators
RF Design Telecoms, Datacoms, Wireless, IoT
The parts are suitable for satellite comms, instrumentation, amplifier circuits, transmit/receive modules, up/down converters, radar and broadcast applications.

Read more...
30 W SP3T switch covering 2-11 GHz
RF Design Telecoms, Datacoms, Wireless, IoT
The switch can handle an input power of 30 W while transmitting or 10 W while receiving, and has an insertion loss of 1,5 dB.

Read more...
Compact Bluetooth LE and Wi-Fi module
RF Design Telecoms, Datacoms, Wireless, IoT
Combining Wi-Fi 4 and Bluetooth 5.0 with a powerful open CPU, NORA-W10 offers enhanced RF performance with low power consumption.

Read more...
Multi-constellation GNSS signal splitter
RF Design Telecoms, Datacoms, Wireless, IoT
The TW162A accepts power from all attached receivers and provides amplification to compensate for the signal-splitting loss.

Read more...