Link Microtek has expanded its range of rotary joints with a new compact dual-channel coaxial model that has been specifically designed for use in low-profile Ka-band satellite-on-the-move (SOTM) terminals in either military or commercial applications.
The AMCORJD-Ka rotary joint features a central K-type coaxial channel for transmissions in the 27,5 to 31,0 GHz range, together with an outer DC to 3 GHz SMA coaxial channel for L-band receive signals.
Microwave performance sees the transmit channel offering an average power rating of 20 W, a VSWR of 1,5:1 and a maximum insertion loss of 1,0 dB. The receive channel can handle an average power of 1 W, and its VSWR and maximum insertion loss are 1,5:1 and 0,25 dB respectively.
Isolation between the two channels is a minimum of 50 dB.
The device has been successfully tested with currents as high as 2 A at 24 V, which means that DC can be fed down the outer channel to drive not only the terminal’s LNB but also the motors that enable the antenna to track a satellite while the host vehicle is moving.
Fabricated in aluminium with an Iridite finish, the rotary joint has a body diameter of 31,75 mm and a length of just 37,72 mm excluding connectors. It incorporates a 50,45 mm-diameter flange as standard and can also be supplied with an integral slip-ring assembly if required.
Other outline configurations and sizes are available on request, tailored to suit specific antenna requirements, while for applications where higher power-handling capability is needed, the device can be specified with a waveguide transmit channel instead of a coaxial connector.
Setting a new benchmark for high-power DC load testing Conical Technologies
Test & Measurement Power Electronics / Power Management
The new ITECH IT8900G/L high-speed, high-power DC electronic load offers a powerful combination of speed, scalability, precision and high-power density.
Read more...Simplifying system design iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
The FGMC63N tri-band MCU Wi-Fi 6E module from Quectel addresses offers integrated connectivity across 2,4 GHz, 5 GHz, and 6 GHz bands in a compact, highly optimised design.
Read more...Dragino’s connectivity catalogue Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Where Wi-Fi demands frequent charging and covers tens of meters, and traditional cellular consumes too much power for battery-operated nodes, LoRaWAN threads the needle.
Read more...RF filters explained RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
As RF environments become increasingly crowded, RF filters play a critical role in maintaining signal quality, improving system performance, and ensuring reliable operation.
Read more...Practical design strategies for 5G RF Design
Telecoms, Datacoms, Wireless, IoT
The Cavli CQM211 aims to provide a platform that combines strong 5G connectivity with onboard compute capability, as well as interface flexibility that suits both new designs and rapid migrations from earlier products.
Read more...An industry-first Android 16 smart module solution RF Design
Computer/Embedded Technology Telecoms, Datacoms, Wireless, IoT
The MeiG Smart SLM580 4G Smart Module features native support for Android 16 and covers core frequency bands in major countries and regions worldwide.
Read more...High performance RF signal conditioning RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The AM3269 from Mercury Systems is a high-performance RF preselector module designed to improve receiver sensitivity and signal integrity in demanding electronic warfare, signals intelligence, test, and communications applications.
Read more...RF filters explained RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
As RF environments become increasingly crowded, RF filters play a critical role in maintaining signal quality, improving system performance, and ensuring reliable operation.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version