DSP, Micros & Memory


Low-power DDR3 memory

19 April 2017 DSP, Micros & Memory

Alliance Memory introduced a new high-speed CMOS mobile low-power DDR3 (LPDDR3) SDRAM designed to extend battery life in compact portable devices. Featuring low voltage operation of 1,2 V/1,8 V and a number of power-saving features, the 16 Gb AS4C512M32MD3 is offered in the 11,0 by 11,5 mm, 178-ball FBGA package. The device features auto temperature-compensated self-refresh (TCSR) to minimise power consumption at lower ambient temperatures. In addition, its partial-array self-refresh (PASR) feature reduces power by only refreshing critical data, while a deep power down mode provides an ultra-low power state when data retention isn't required. The device offers high-speed operation with a clock frequency of 667 MHz and data rate of 1333 Mbps.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

40 W and 75 W railway DC/DC converter
Brabek Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.

Read more...
Advanced sensing powers modern drones
Future Electronics DSP, Micros & Memory
Allegro MicroSystems has a portfolio of sensors, motor drivers, and power management devices specifically designed to enhance drone efficiency, reliability, and control.

Read more...
Addressing latency and signal integrity challenges
Altron Arrow DSP, Micros & Memory
Strengthening Microchip Technology’s data centre solutions portfolio, its XpressConnect retimers support high-bandwidth architectures, while helping reduce integration complexity.

Read more...
4 kW e-mobility DC-DC converter
Brabek Power Electronics / Power Management
The RECOM RMOD4000 series of compact, plug-and-play DC-DC converters is a cost-effective solution to provide isolated 14 V, 28 V, or 56 V DC network rails from a high input voltage between 180 and 950 V DC.

Read more...
ESP32-S31 for advanced IoT
iCorp Technologies DSP, Micros & Memory
At the heart of the device is a dual-core 32-bit RISC-V MCU operating at up to 320 MHz, delivering 6,86 CoreMark/MHz performance with MMU support for efficient memory management.

Read more...
Cortex-M33 performance for cost-sensitive designs
Future Electronics DSP, Micros & Memory
The STM32C5 series from STMicroelectronics introduces a new generation of entry-level microcontrollers engineered to deliver enhanced processing capability, modern security, and cost-effective scalability for connected embedded applications.

Read more...
Power-dense modules operate up to 115 V DC
Brabek Power Electronics / Power Management
The RPMVH-0.5 series of cost-effective, non-isolated buck regulator modules from RECOM delivers 0,5A of output at fully regulated voltages up to 24 V DC.

Read more...
Memory shortage 2026: Engineering implications for South Africa
DSP, Micros & Memory
[Sponsored] Addressing this challenge requires system-level thinking and adoption with McKinsey Electronics providing the engineering and sourcing framework required to maintain system resilience despite ongoing global constraints.

Read more...
Cost-effective microcontroller series
Altron Arrow DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.

Read more...
Battery-friendly Thread and BLE solution
iCorp Technologies DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved