|
|
|
Wi-Fi and Bluetooth module
29 May 2019, Telecoms, Datacoms, Wireless, IoT
Murata Manufacturing has collaborated with Cypress Semiconductor to develop the Type 1LV (CYW43012) low-power, small form factor Wi-Fi and Bluetooth module. This product is designed to improve battery life in wearables, smart home products and portable audio applications.
Compared to the Type 1DX (CYW4343W), power usage in the Type 1LV is approximately 54% lower in DTIM 1, 60% in DTIM 3, up to 50% for 2,4 GHz Rx, and 28% for 2,4 GHz Tx.
Based on the Cypress CYW43012 combo chipset, the dual-band Wi-Fi 11a/b/g/n/(11ac friendly) + Bluetooth 5.0 module provides data transfer rates up to 78 Mbps on Wi-Fi and 3 Mbps on Bluetooth. It supports a broad range of popular processors including PSoC6, i.MX RT, STM32, i.MX, and IP camera platforms, as well as Linux and RTOS based applications.
The Type 1LV uses sophisticated hardware mechanisms and algorithms to ensure that Wi-Fi and Bluetooth coexistence is optimised for maximum performance. An embedded Ipv6 network stack can be used to keep the host processor in sleep mode while maintaining network connections. The module also supports BLE 2 Mbps, LE secure connections, LE privacy 1.2, and LE data packet length extension.
The device measures 10,0 mm (L) x 7,2 mm (W) x 1,4 mm (H), and is available with a reference antenna design for FCC/IC certifications and CE conducted test to provide a lower development cost and faster time to market.
For more information contact Quatraine Domoney, Avnet South Africa, +27 11 319 8600, quatraine.domoney@avnet.eu, www.avnet.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Low phase-noise amplifier
31 July 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
Available in 2,8 x 1,73 x 0,1 mm bare-die and 5 x 5 mm, 32-lead AQFN packaged formats, MACOM Technology Solutions’ MAAL-011151 is well suited for use as a low phase-noise amplifier stage for signal generation ...
- Wideband digital attenuator
31 July 2019, Telecoms, Datacoms, Wireless, IoT
The CMD280 from Custom MMIC is a wideband 5-bit digital attenuator that operates from DC to 30 GHz (covering the L, S, C, X, Ku, K and Ka bands). Each bit of this GaAs MMIC attenuator is controlled by ...
- Double-balanced X-band mixer
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The MM1-0832LSM is a double-balanced mixer from Marki Microwave with an RF/LO frequency from 8 to 32 GHz and an IF frequency from DC to 12 GHz. This high-frequency X-band GaAs MMIC mixer works well as ...
- Low-noise RF amplifier
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The CMD299 from Custom MMIC is a wideband GaAs MMIC low-noise amplifier that operates from 18 to 40 GHz. It provides an output power of up to 7,5 dBm (0,0056 W), a gain of 16 dB, and has a noise figure ...
- Wideband amp for instrumentation and communications
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions has rolled out a new wideband distributed amplifier in the form of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
- Wideband LTE antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Taoglas announced an addition to its successful Warrior series: the PA740.A antenna. With additional LTE bandwidth and new bands added for 5G functionality, the new antenna is an evolved design from the ...
- Mini programmable IoT module
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The EM510 is an ultra-compact Tibbo BASIC/C-programmable IoT module with a single UART, Ethernet, and optional Wi-Fi/BLE (Bluetooth Low Energy) connectivity. The module offers substantial performance ...
- Low-power IoT module in volume production
31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Nordic Semiconductor’s nRF9160 system-in-package (SiP) – an LTE-M/NB-IoT and GPS cellular IoT module – has entered the final volume silicon production phase, having successfully passed a series of major ...
- External antenna for 868/915 MHz bands
31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Shockwave TLS.90.205111 is a mechanically robust, waterproof, external antenna operating at 868 MHz and 915 MHz with 2 metres of low-loss TGC-200 cable and an SMA(M) connector. Manufactured by Taoglas, ...
- Double-balanced RF mixer
31 July 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
The MAMX-011035 from MACOM Technology Solutions is a GaAs double-balanced passive diode mixer housed in a lead-free 3 mm, 12-lead QFN package. The mixer offers low conversion loss, high linearity and ...
- Wi-Fi front-end module
31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The QPF7219, made by Qorvo, is an integrated front-end module designed for Wi-Fi 6 (802.11ax) systems. It integrates a 2,4 GHz power amplifier (PA) with power detector, BAW filter, regulator, transmit-receive ...
- Hinged 4G LTE antenna
31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The hinged Apex II TG.35 wideband dipole antenna from Taoglas has been designed to cover all cellular, ISM and Wi-Fi working frequencies in the 600-6000 MHz spectrum. It has been primarily designed for ...
|
|
