mobile | classic
Dataweek Electronics & Communications Technology Magazine





Follow us on:
Follow us on Facebook Share via Twitter Share via LinkedIn


Search...

Electronics Buyers' Guide

Electronics Manufacturing & Production Handbook 2019


 

Wideband amp for 5G test and measurement
31 July 2019, Telecoms, Datacoms, Wireless, IoT

MACOM Technology Solutions announced a new wideband distributed amplifier with the introduction of the MAAM-011238, offered in both bare-die and surface-mount packaged formats. Well suited for use in 5G test and measurement equipment, it gives system designers the agility to leverage a single amplifier for 5G applications spanning sub-6 GHz to mmW (millimetre-wave) frequencies.

The amplifier supports wideband operation from 100 kHz up to 50 GHz (67,5 GHz for the bare-die version) with typical gain of 14 dB at 30 GHz. The input and output are fully matched at 50Ω with typical return loss of 10 dB across the band.

The overall ease of use for customers is enhanced utilising a positive gate bias, thereby eliminating the need for a negative voltage supply and bias sequencer. The MAAM-011238’s integrated power detector further simplifies system designs while preserving valuable board space.

For more information contact Andrew Hannay, RFiber Solutions, +27 82 494 5466, sales@rfibersolutions.com


Credit(s)
Supplied By: RFiber Solutions
Tel: +27 12 667 5212
Fax: 086 535 9319
Email: sales@rfibersolutions.com
www: www.rfibersolutions.com
  Share on Facebook Share via Twitter Share via LinkedIn    

Further reading:

  • Low phase-noise amplifier
    31 July 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
    Available in 2,8 x 1,73 x 0,1 mm bare-die and 5 x 5 mm, 32-lead AQFN packaged formats, MACOM Technology Solutions’ MAAL-011151 is well suited for use as a low phase-noise amplifier stage for signal generation ...
  • Wideband digital attenuator
    31 July 2019, Telecoms, Datacoms, Wireless, IoT
    The CMD280 from Custom MMIC is a wideband 5-bit digital attenuator that operates from DC to 30 GHz (covering the L, S, C, X, Ku, K and Ka bands). Each bit of this GaAs MMIC attenuator is controlled by ...
  • Double-balanced X-band mixer
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The MM1-0832LSM is a double-balanced mixer from Marki Microwave with an RF/LO frequency from 8 to 32 GHz and an IF frequency from DC to 12 GHz. This high-frequency X-band GaAs MMIC mixer works well as ...
  • Low-noise RF amplifier
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The CMD299 from Custom MMIC is a wideband GaAs MMIC low-noise amplifier that operates from 18 to 40 GHz. It provides an output power of up to 7,5 dBm (0,0056 W), a gain of 16 dB, and has a noise figure ...
  • Wideband amp for instrumentation and communications
    26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
    MACOM Technology Solutions has rolled out a new wideband distributed amplifier in the form of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
  • Wideband LTE antenna
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    Taoglas announced an addition to its successful Warrior series: the PA740.A antenna. With additional LTE bandwidth and new bands added for 5G functionality, the new antenna is an evolved design from the ...
  • Mini programmable IoT module
    26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The EM510 is an ultra-compact Tibbo BASIC/C-programmable IoT module with a single UART, Ethernet, and optional Wi-Fi/BLE (Bluetooth Low Energy) connectivity. The module offers substantial performance ...
  • Low-power IoT module in volume production
    31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    Nordic Semiconductor’s nRF9160 system-in-package (SiP) – an LTE-M/NB-IoT and GPS cellular IoT module – has entered the final volume silicon production phase, having successfully passed a series of major ...
  • External antenna for 868/915 MHz bands
    31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The Shockwave TLS.90.205111 is a mechanically robust, waterproof, external antenna operating at 868 MHz and 915 MHz with 2 metres of low-loss TGC-200 cable and an SMA(M) connector. Manufactured by Taoglas, ...
  • Double-balanced RF mixer
    31 July 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
    The MAMX-011035 from MACOM Technology Solutions is a GaAs double-balanced passive diode mixer housed in a lead-free 3 mm, 12-lead QFN package. The mixer offers low conversion loss, high linearity and ...
  • Wi-Fi front-end module
    31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The QPF7219, made by Qorvo, is an integrated front-end module designed for Wi-Fi 6 (802.11ax) systems. It integrates a 2,4 GHz power amplifier (PA) with power detector, BAW filter, regulator, transmit-receive ...
  • Hinged 4G LTE antenna
    31 July 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
    The hinged Apex II TG.35 wideband dipole antenna from Taoglas has been designed to cover all cellular, ISM and Wi-Fi working frequencies in the 600-6000 MHz spectrum. It has been primarily designed for ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronics Buyers’ Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    Classic | Mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.