Editor's Choice


IoT’s biggest obstacle is security

12 August 2015 Editor's Choice News

Research conducted by Telecom Intelligence has revealed that information security remains the biggest inhibitor of the development of the Internet of Things (IoT), with 42% of respondents identifying security as one of the top two challenges for widespread adoption of IoT.

Mark Warren.
Mark Warren.

According to Mark Warren, Gemalto’s M2M solutions manager for Africa, trust is critical for IoT to achieve its potential, especially in terms of its adoption by the mass market. “As the research makes clear, IoT depends on a complex ecosystem, including providers of connectivity, device, cloud, data analytics and more,” he says. “Securing the whole IoT stack, from the device hardware and software through all the network components and the cloud providers in such a way as to build trust with users is a tall order.” He adds that the requisite level of trust can only be built up when the identity of participants – both human and machine – can be guaranteed, an area in which Gemalto has built strong expertise.

Telecoms Intelligence based its 2015 IoT Outlook Report on input from close to 1000 respondents, spanning operators, academics, consultants, cloud service providers and chipset manufacturers, among others. Its aim was to provide insight that was highly granular.

An important question answered by the research relates to what the IoT actually is. The majority of respondents (51,8%) primarily associate the IoT with consumer technology, such as home automation (28,5%) and wearable or mobile technology (23,3%). For 16,7%, the IoT is associated with sensors, while the remaining 8,4% associate it with machine-generated big data and 15,4% with the smart city – a combined 40,5% that relates, broadly speaking, to the industrial IoT.

Telecoms operators in pole position

The research additionally indicates that telecommunications operators are considered to be in pole position within the emerging IoT ecosystem. The majority of respondents (59,7%) are saying IoT was impossible without telecoms service providers, while 50,3% identified 4G as the catalyst for widespread adoption of IoT. Just under a third of respondents (32%) said telecommunications operators are best placed to monetise IoT, ahead of cloud providers (17,5%).

Another potential barrier to the successful development and commercialisation of IoT is the creation of standards to ensure interoperability between devices and sensors and, critically, between connectivity platforms. Over one-third of respondents (37,2%) fingered 'issues relating to platform standardisation' as one of the biggest barriers to the expansion and acceptance of the IoT.

With cellular networks likely to provide the main medium of connectivity, telecoms companies are likely to play a key role in driving connectivity standards, even across local-area and wide-area networks. As such, the importance of resolving inter-connectivity issues cannot be overemphasised, especially given the fact that two rival open collaboration groups are developing networking topologies for the wide-area network that are capable of handling widely dispersed M2M and IoT traffic.

Warren explains that the opportunities created by IoT are wide-ranging and limited only by one’s imagination. “Given that data-driven insights are the key value to be derived from use of the IoT, it follows that providers of cloud-based storage and analytics are likely to benefit from numerous opportunities as their offerings will underpin the actual IoT-based services, whether consumer or business-focused. These will naturally be derived from market needs – and ‘gaps’ identified by providers.” He adds that IoT similarly represents a significant opportunity for providers of the high-speed connectivity required to support real-time delivery of insights and decision-making tools.

Opportunities in industrial IoT will likely be most evident in the utilities sector (22,4%) as smart grids and related services kick in, followed by telecommunications (18,1%); freight, cargo and logistics (17%); automotive/ aeronautics (14%) and health care (11,8%). Most respondents (50,3%) believe that telecommunications operators are best positioned to offer industrial IoT services, with 47,5% identifying enterprise solutions and professional services as the primary monetisation opportunities in this area.

2020 to be key year for mass adoption of IoT

While only a minority of respondents (16,7%) say they are in a position to monetise IoT services currently, 24,9% believe they will be ready to do so by 2016, with a further 20,8% setting their sights on 2020.

“To most of the survey respondents, 2020 seems to be a realistic target date for achieving widespread acceptance of the IoT by consumers, business and even forward-thinking governments,” says Warren. “However, to turn the considerable potential of the IoT into reality, building trust with potential users is the vital first step,” he concludes.

For more information contact Mark Warren, Gemalto M2M, +27 (0) 11 088 8500, [email protected], www.gemalto.com/m2m





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Quectel’s RG255C-NA and RM255C-GL accelerate 5G RedCap adoption
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
Quectel’s RG255C-NA and RM255C-GL modules represent a strategic move into this fast-growing segment, delivering Sub-6 GHz 5G connectivity optimised for mid-tier IoT applications.

Read more...
SDRs – Which RF architecture should you choose?
RFiber Solutions Editor's Choice Telecoms, Datacoms, Wireless, IoT
There are several common methods of implementing SDR architectures. This paper discusses which is best when meeting a specific need.

Read more...
Surviving the extremes: Understanding shock and vibration in MEMS sensors
Altron Arrow Editor's Choice Test & Measurement
By considering factors such as mechanical headroom, damping, and system-level robustness, designers can ensure that the chosen sensor not only survives, but performs reliably over time.

Read more...
A two-stage approach to super-wide input voltage range DC-DC converters
RFiber Solutions Editor's Choice
Teaser: In addition to handling the various input voltage ranges required, the SynQor line of InQor DC-DC converters are fully encased and ruggedised to handle the harsh environments that often accompany systems that have such challenging technical requirements.

Read more...
From the editor's desk: Engineering the future
Technews Publishing Editor's Choice
As we welcome the first issue of Dataweek in a new year, it is an exciting time to be part of the electronics community, especially for our readers. The pace of change across our industry continues to accelerate, reshaping how we design, build, and interact with technology.

Read more...
Barracuda commissions new IPC Class 3 aerospace facility
Barracuda Holdings Editor's Choice News
The company has commissioned a new dedicated IPC Class 3 facility in Somerset West. and has concluded a new investment partnership that will provide the capital and management capacity required to scale operations.

Read more...
Engineering copper grain structure for high-yield hybrid bonding in 3D packaging
Testerion Editor's Choice Manufacturing / Production Technology, Hardware & Services
The way copper grains are sized and distributed forms the metallurgical foundation of hybrid bonding, enabling lower bonding temperatures, greater reliability, and stable grain structures throughout integration.

Read more...
Understanding solder dross: causes and control strategies
Truth Electronic Manufacturing Editor's Choice Manufacturing / Production Technology, Hardware & Services
Dross formation is an inevitable consequence of wave soldering. It occurs when molten solder comes into contact with oxygen, forming metal oxides that float on the surface of the solder bath. Over time, this oxidation byproduct accumulates and must be removed to maintain solder quality and process consistency.

Read more...
From the editor's desk: Could X-ray lithography disrupt the economics of advanced chip manufacturing?
Technews Publishing Editor's Choice
Advanced semiconductor manufacturing has reached a point where technical progress is increasingly constrained by economic reality, and the proposed use of X-ray lithography represents a bold attempt to reset these economics.

Read more...
Could the EU’s Cyber Resilience Act affect your electronics manufacturing business?
Altron Arrow Editor's Choice
South African companies exporting IoT devices to the European Union face a significant regulatory shift with the Cyber Resilience Act becoming mandatory in December 2027.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved