Four-port serial communication interface card

9 April 2003 Computer/Embedded Technology

The PCL-746+ is a four-port serial communication interface card, and by using on-board jumpers, each port can be configured individually to either RS232, RS422, or RS485. The card uses 16C550 UARTs and provides improved interrupt handling for reliable operation at transmission speeds of up to 115,2 Kbps. Both standard and enhanced operation is possible. In standard mode each of the four ports can be set up as either the address or the IRQ channel, while in enhanced mode, all four ports can be set to share the same IRQ.

When an on-board interrupt occurs, the interrupt status register indicates which port has generated it. The shared interrupt can be set to most common AT interrupts. This simplifies programming, speeds up interrupt processing, and frees up interrupts for other devices.

The RS485 mode automatically senses the direction of incoming data and switches its transmission direction accordingly, making it act as an RS232 network. Application software written for half duplex RS232 can be used without modification. In addition, the user can simply build an RS485 network with just two wires.

For more information contact ProMicro, 011 706 7913, [email protected]

Further reading:

First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...

---

QuecPi smart development board
iCorp Technologies Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.

Read more...

---

Eskom announces PV registration extension
Computer/Embedded Technology
The South African Photovoltaic Industry Association has welcomed Eskom’s decision to extend its zero-registration fee policy and free smart meter installation for residential Small-Scale Embedded Generation customers until March 2026.

Read more...

---

Unlock enhanced wireless performance
Computer/Embedded Technology
Duxbury Networking has introduced Cambium Networks’ Deep Virtual Circuit (Deep VC) technology, a free upgrade for the PMP 450 platform that will transform wireless broadband performance across the country.

Read more...

---

Computing in industrial environments
Vepac Electronics Computer/Embedded Technology
The Panasonic Toughbook CF-33/CF33 Tablet is a 12,0-inch fully rugged device with hot-swappable twin batteries and highly configurable capabilities.

Read more...

---

DDR5 DRAM series
Vepac Electronics Computer/Embedded Technology
Innodisk has announced its DDR5 6400 DRAM series featuring the industry’s largest 64GB single-module capacity.

Read more...

---

Generate waveforms at 10 GS/s
Vepac Electronics Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.

Read more...

---

Quad-port 10GBASE-T controller
Rugged Interconnect Technologies Computer/Embedded Technology
he SN4-DJEMBE, available from Rugged Interconnect, is a networking adaptor card for CompactPCI Serial systems, equipped with four individual controllers for 10GBASE-T.

Read more...

---

HPE policy management platform
Computer/Embedded Technology
Duxbury Networking has announced the availability of the HPE Aruba ClearPass policy management platform, that enables business and personal devices to connect to an organisational level, in compliance with corporate security policies.

Read more...

---

IoT gateways
Brandwagon Distribution Computer/Embedded Technology
IoT Gateways are hardware and software devices that are responsible for collecting data from connected devices, managing communication between devices and the cloud, and processing and analysing the data before sending it to the cloud for further analysis.

Read more...

---