Computer/Embedded Technology


Industrial Ethernet switch for extended temperature range

21 May 2003 Computer/Embedded Technology

Contemporary Controls' new Industrial Ethernet switch, now a part of the CTRLink family, is very effective for hostile applications with temperatures ranging from -40 to +75°C. The EISX9-100T segments the Ethernet LAN into nine collision domains, acting as a 'bridge' between data links to produce a larger network diameter than is possible with repeating hubs. Each port automatically negotiates its data rate to 10 Mbps or 100 Mbps and controls data flow with the Pause function in full-duplex or the backpressure mode in half-duplex.

The switch learns port assignments by reading Ethernet frames and logging source addresses on a table, which can hold 2048 addresses. With this information, it enhances throughput by restricting traffic to only those ports party to a data exchange. Other data can be simultaneously interchanged on other ports. The store-and-forward process is implemented and broadcast, multicast, or unicast transmissions are received by all ports.

In addition to the power LED, each port has an LED indicating link/activity/data rate by colour: green for 100 Mbps and yellow for 10 Mbps. Other features of the EISX9-100T include mounting on TS35 DIN-rail, operating from a wide-range of low-voltage AC or DC power sources and offering redundant power connections.

The company also offers a free guide '10 issues to consider before installing Industrial Ethernet' as well as an Ethernet installers' slide chart, which packs all of the most important information about Ethernet into a handy pocket reference.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Intelligent video processing
Rugged Interconnect Technologies Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.

Read more...
Quectel’s single-board computers put industrial edge computing on one PCB
iCorp Technologies Computer/Embedded Technology
Quectel Pi series of single-board computers (SBCs), designed for a broad range of industrial applications, include three compact development platforms – the Quectel Pi M1, L1, and H1 boards.

Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.

Read more...
Arrival of the Epic-PTH9
Vepac Electronics Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.

Read more...
EPS-9600 Managed Layer 3 Ethernet Switch with next-generation Time- Sensitive Networking
Electronic Products Design Computer/Embedded Technology
Diamond Systems has introduced EPS-9610 (part of the EPS-9600 family), a rugged, ultra-compact embedded Ethernet switch which integrates military-grade ruggedness with next-generation Time-Sensitive Networking (TSN) capabilities.

Read more...
An industry-first Android 16 smart module solution
RF Design Computer/Embedded Technology Telecoms, Datacoms, Wireless, IoT
The MeiG Smart SLM580 4G Smart Module features native support for Android 16 and covers core frequency bands in major countries and regions worldwide.

Read more...
Accelerate STM32-based IoT development with SPI EEPROM board
Altron Arrow Computer/Embedded Technology
ST Microelectronics’ ready-to-use STM32 expansion board helps design more efficient battery-friendly IoT devices based on ultra low power 32-Mbit Page.

Read more...
Unleash the next generation of Intel Core power
Vepac Electronics Computer/Embedded Technology
The EPIC-BTS9 from AAEON, is tailor-made to bring unprecedented performance to smart manufacturing and industrial robotics.

Read more...
QMC series I/O modules for VITA 93 small form factor mezzanine
Rugged Interconnect Technologies Computer/Embedded Technology
The new line of VITA 93 QMC mezzanine modules, from Acromag, are engineered to meet increasing demands for smaller form factors and more performance.

Read more...
MIKROE celebrates 2000th Click board
Computer/Embedded Technology
MIKROE has launched its 2000th Click board, the RTC 27 Click, designed for low-power real-time clock and calendar functionality, time tracking, alarm event generation, watchdog timing, and timestamp capture.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved