Advantech's MIC-3081 series CompactPCI is a 10U-high enclosure with eight CompactPCI slots for rackmounting, which provides a flexible and configurable development platform. It supports 8-slot backplane H.110 CT bus backplane and rear I/O, designed to speed the implementation of telecom Internet and industrial automation applications.
A 2U space underneath the card slots accommodates two 163-CFM high-speed fans, to provide forced cooling air into the system. There are also two high-speed blowers on the top for linear air flow to optimise the chassis cooling system operation. All fans are also hot-swappable, for uninterruptible replacement.
The MIC-3081 has an optional intelligent chassis management module, the MIC-3924A, to monitor and report internal conditions via SNMP trap, e-mail, pager and beep sounds. The system's status, including CPU (SBC) temperature, system power voltage levels and fan speeds, can be easily checked from a remote Web browser for administrator monitoring. The chassis management module's serial port can be linked to a modem, to communicate to a remote host for realtime monitoring, module configuration and alarm reporting. No software is needed for remote monitoring since the SNMP/HTTP protocol provides an open platform for all the operating system.
The 6U-sized 8-slot backplane of the MIC-3081 supports 32/64-bit operation, and complies with PICMG 2.1 Hot-Swap Specification. Eight CompactPCI slots are available.
Rugged, I/O-rich NVIDIA Jetson solutions Electronic Products Design
Computer/Embedded Technology
Developed for the NVIDIA Jetson AGX Orin, the Osbourne carrier and development kit is a compact and rugged platform designed to support a wide range of embedded AI and edge computing applications.
Read more...New generation of SBCs
Computer/Embedded Technology
HardKernel’s new generation of ODROID H4-series SBCs are more powerful; offering higher performance and richer interfaces than previous generations.
Read more...Smallest 13th gen Intel SBC Vepac Electronics
Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.
Read more...Versatile PoE extender Vepac Electronics
Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.
Read more...First NVMe SSD Built with 8th-gen BiCS FLASH EBV Electrolink
Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.
Read more...QuecPi smart development board iCorp Technologies
Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.
Read more...Eskom announces PV registration extension
Computer/Embedded Technology
The South African Photovoltaic Industry Association has welcomed Eskom’s decision to extend its zero-registration fee policy and free smart meter installation for residential Small-Scale Embedded Generation customers until March 2026.
Read more...Unlock enhanced wireless performance
Computer/Embedded Technology
Duxbury Networking has introduced Cambium Networks’ Deep Virtual Circuit (Deep VC) technology, a free upgrade for the PMP 450 platform that will transform wireless broadband performance across the country.
Read more...Computing in industrial environments Vepac Electronics
Computer/Embedded Technology
The Panasonic Toughbook CF-33/CF33 Tablet is a 12,0-inch fully rugged device with hot-swappable twin batteries and highly configurable capabilities.
Read more...DDR5 DRAM series Vepac Electronics
Computer/Embedded Technology
Innodisk has announced its DDR5 6400 DRAM series featuring the industry’s largest 64GB single-module capacity.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version