Measuring only 150 x 70 x 35 mm, the convection-cooled and sealed AED100 external AC/DC power supply is claimed to be the world's smallest 100 W unit. This product is important in a market where designers need ever-increasing power for their systems but at the same time are under pressure to keep the size of external power supplies to a minimum.
Launched by power supply specialists XP and represented locally by Vepac Electronics, this unit for use in any commercial or industrial application conforms to EN61000-3-2 and meets EN55022, CISPR22 and FCC Level B conducted and radiated EMC specifications. The AED100 unit has a universal AC input via an IEC320/C14 connector and has all major international safety approvals.
This power supply is offered with a choice of seven standard output connectors, and customer-specified connectors are also available for quantities as low as 10 units. The AED100 offers single output voltages of 12, 15, 18, 19, 24 or 48 V d.c. and maximum output current ratings are 8,25 to 2,1 A respectively. It has a minimum hold-up time of 20 ms at 115 V a.c., 1% peak-to-peak maximum ripple and noise, and both over-voltage and over-current protection. Its 90% efficiency minimises heat generation, allowing compact size. It has 3000 V a.c. input-to-output isolation and ambient operating temperature is 0 to +55°C.
The AED100 complements 36, 45 and 70 W external power supplies in the same family.
Rugged railway-grade DC-DC power modules iCorp Technologies
Power Electronics / Power Management
iCorp Technologies has introduced the AIPUPOWER ZCD100 and ZCD150 Series, a family of rugged DC-DC converters designed to meet the demanding electrical and environmental requirements of railway and transportation systems.
Read more...Four-quadrant regenerative grid simulator Conical Technologies
Power Electronics / Power Management
The IT7900EP series high-performance regenerative grid simulator from ITECH is a full four-quadrant AC grid simulator capable of both sourcing and sinking power.
Read more...90 W PSU with 150% boost capability Brabek
Power Electronics / Power Management
RECOM’s cost effective REFIN2U-S90/CL DIN rail AC/DC boasts a 90 W rating with a boost capability of 150% for 4,5 seconds to allow for surge loads.
Read more...Standalone USB PD controller Future Electronics
Power Electronics / Power Management
The STUSB4531 from STMicroelectronics is a standalone USB Power Delivery sink controller designed to streamline the implementation of USB-C power negotiation in sink devices without requiring a full software stack on a host microcontroller.
Read more...Panasonic TOUGHBOOK 33 2-in-1 detachable Vepac Electronics
Computer/Embedded Technology
The Panasonic TOUGHBOOK 33 is a fully rugged 12-inch 2-in-1 detachable notebook designed to deliver unmatched flexibility, durability, and performance for mobile professionals working in demanding environments.
Read more...MIL-Spec DC-DC power converters Vepac Electronics
Power Electronics / Power Management
PowerGood has introduced a range of 15 W to 600 W military DC-DC power converters engineered for mission critical defence applications.
Read more...Compact power MOSFET for high current switching Future Electronics
Power Electronics / Power Management
onsemi’s NTMFSC2D6N08X is a high-performance 80 V N-channel power MOSFET engineered for demanding switching and power conversion applications.
Read more...DC link capacitors for demanding applications RS South Africa
Power Electronics / Power Management
TDK Corporation has announced the B3271xP series of DC link film capacitors, offering high thermal robustness for demanding automotive and industrial power electronics.
Read more...N-channel power MOSFETs TRX Electronics
Power Electronics / Power Management
The TSM2N7002 series from Taiwan Semiconductor are logic-level N-channel power MOSFETs designed with low drain-source on-state resistance, reducing conduction losses and improving efficiency in switching applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version