Computer/Embedded Technology


Three-axis quadrature encoder and counter card

10 September 2003 Computer/Embedded Technology

ProMicro's PCL-833 is a three-axis quadra-ture encoder and counter add-on card for PC/AT compatible computers. Optically isolated up to 2500 V, it allows a PC to perform position monitoring for motion control systems.

Each input includes a decoding circuit for incremental quadrature encoding. Inputs accept either single-ended or differential signals. Quadrature input operates with or without an index, allowing linear or rotary encoder feedback.

The counter card has three independent 24-bit counters which are capable of cascading up to 48 bits. The maximum quadrature input rate is 1,0 MHz and the maximum input rate in counter mode is 2,4 MHz. Each counter can be individually configured for quadrature decoding, pulse/direction counting or up/down counting.

Five digital input channels are available with each channel accepting digital input as an index input for a rotary encoder or as a home sensor input for a linear encoder. An interrupt to the system can be generated based on a signal from the digital inputs, overflow/underflow of the counters or on a programmed time interval. Interrupts can be generated repeatedly at any time interval from 0,1 ms to 255 s allowing precise speed monitoring of the control system.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Vertiv expands rack PDU portfolio
Computer/Embedded Technology
Vertiv has announced its new Vertiv PowerIT rack power distribution units designed to address the rising power needs of data-intensive workloads, including AI and high-performance computing.

Read more...
Bluetooth 6.0 module provides channel sounding
Avnet Silica Computer/Embedded Technology
The latest Bluetooth module from Panasonic Industry provides excellent performance and minimal power consumption.

Read more...
Rugged PoE switch built for industrial demands
Conical Technologies Computer/Embedded Technology
The rugged Planet IGS-5225-8P4S-12V comes in a compact, rugged, and highly efficient design, making it the switch of choice for engineers working in harsh environments.

Read more...
High-performance networking for demanding environments
Electronic Products Design Computer/Embedded Technology
The Raptor-Epsilon Ethernet switch system is a ruggedised networking solution engineered to deliver advanced switching capabilities, superior reliability, and energy-efficient operation in the most demanding environments.

Read more...
Rugged, I/O-rich NVIDIA Jetson solutions
Electronic Products Design Computer/Embedded Technology
Developed for the NVIDIA Jetson AGX Orin, the Osbourne carrier and development kit is a compact and rugged platform designed to support a wide range of embedded AI and edge computing applications.

Read more...
New generation of SBCs
Computer/Embedded Technology
HardKernel’s new generation of ODROID H4-series SBCs are more powerful; offering higher performance and richer interfaces than previous generations.

Read more...
Smallest 13th gen Intel SBC
Vepac Electronics Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.

Read more...
Versatile PoE extender
Vepac Electronics Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.

Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...
QuecPi smart development board
iCorp Technologies Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved