Telecoms, Datacoms, Wireless, IoT


Transmitter and receiver data link pair

5 November 2003 Telecoms, Datacoms, Wireless, IoT

Featuring an industry standard pin-out and footprint, the TX2M and RX2M from Radiometrix brings to market a low power and highly reliable data link. The pair provides a solution for applications where existing wideband modules lack sufficient range or where multichannel operation is required, according to the company.

These UHF narrow band FM multichannel radio modules are available in two versions covering the 458,5 through to 458,8 MHz UK bands (at 100 mW) and in Europe on 433,05 through 434,79 MHz bands. The 433 MHz version conforms to EN 300220-3 and EN 301489-3 and the 458 MHz versions to UK specs.

Other features include: high performance double superhet, 128 channel PLL synthesizer with TCXO; data rates to 5 Kbps for standard modules; usable range over 1 km; full screening and low profile; feature rich interface (RSSI, noise squelch and analog and digital basebands); RS232 interface allows reprogramming; low power requirement.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Ethernet tap for IO Ninja
25 March 2020, RF Design , Test & Measurement
Monitoring network communications of your PC can be accomplished without any specialised hardware – just use the Pcap Sniffer plugin of IO Ninja. The task of tapping into the Ethernet traffic of a non-PC ...

Read more...
5G security is all-important for governments
25 March 2020 , Telecoms, Datacoms, Wireless, IoT
The 5G revolution is about to flip us from a society that ‘uses networks’ to one that ‘runs on networks’. 5G will connect everyone to everything. It will combine with other key disruptors – the cloud, ...

Read more...
Bluetooth 5.2 system-on-chip
25 March 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
Nordic Semiconductor announced the nRF52820 Bluetooth 5.2 system-on-chip (SoC), the sixth addition to its nRF52 Series. The nRF52820 is an ultra-low-power Bluetooth Low Energy (Bluetooth LE), Bluetooth ...

Read more...
NB-IoT prototyping board
29 April 2020, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
The iTracker RAK8211-NB is a versatile developer board aimed at aiding in quick prototypes using NB-IoT. The board includes an array of connectivity options (NB-IoT, BLE5.0 and GPS) and sensors like an ...

Read more...
Low-cost Sigfox reference design
29 April 2020, iCorp Technologies , Telecoms, Datacoms, Wireless, IoT
HopeRF has released a reference design for low-cost Sigfox connectivity using its CMT2189C devices. These are fully integrated, highly flexible, high-performance, SoC (G)FSK/OOK transmitters with an embedded ...

Read more...
Modem cards for industrial IoT applications
29 April 2020, Gemalto IoT (Cinterion Wireless Modules) , Telecoms, Datacoms, Wireless, IoT
Gemalto’s family of Cinterion IoT modem cards delivers instant access to both LTE cellular and 5G networks for a range of industrial IoT applications like vending machines or digital signage, routers ...

Read more...
Temperature conditioned coaxial cable assemblies explained
29 April 2020, RF Design , Interconnection
There are many applications, some emerging, that require both phase and amplitude error to be minimised. These applications include synthetic aperture radar using antenna arrays, beamforming/MIMO antenna ...

Read more...
Dual military-grade transceiver
29 April 2020, ASIC Design Services , Telecoms, Datacoms, Wireless, IoT
Holt Integrated Circuits today announced the introduction of its HI-15850, the world’s first 3,3 V MIL-STD-1553 dual transceiver with 1,8 V, 2,5 V and 3,3 V compatible digital I/O. This feature gives ...

Read more...
Bluetooth 5.2 system-on-chip
29 April 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
Nordic Semiconductor announced the nRF52820 Bluetooth 5.2 system-on-chip (SoC), the sixth addition to its nRF52 Series. The nRF52820 is an ultra-low-power Bluetooth Low Energy (Bluetooth LE), Bluetooth ...

Read more...
Ceramic-based thick film RF filters
29 April 2020, RF Design , Telecoms, Datacoms, Wireless, IoT
Our new Planar X Series is part of Smiths Interconnect’s overarching initiative that entails the creation of best-in-class planar RF filter solutions designed and tested to support various applications ...

Read more...