DSP, Micros & Memory


16-bit low power micro with ADC

24 March 2004 DSP, Micros & Memory

Renesas' very low power single-chip 16-bit microcontroller with on-chip flash, the H8/38086F, is based on the H8/300H CPU core and is the company's first micro to incorporate a high-precision delta-sigma type 14-bit ADC. This eliminates the need for an external dedicated high-precision conversion IC. The delta-sigma type ADC is capable of high precision at high resolution, with a 3,0 V full-scale range at ±274 µV (typical) compared with the ±7,3 mV (typical) of a conventional successive approximation type ADC with 10-bit resolution. The converter also features an operating voltage range of 2,2 to 3,6 V and a conversion time of 64,1 to 1282 µs. Peripheral functions include: a programmable gain amplifier; band-gap voltage reference; LCD controller/driver; RTC; and an I2C bus interface. It operates on just 1,8 V, and has eight versatile power-down modes - down to 900 µA (typical) at 1,8 V/1 MHz operation in 'watch' mode, with current dissipation 0,5 µA.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Ultra-low power MEMS accelerometer
Altron Arrow Analogue, Mixed Signal, LSI
Analog Devices’ ADXL366 is an ultra-low power, 3-axis MEMS accelerometer that consumes only 0,96 µA at a 100 Hz output data rate and 191 nA when in motion-triggered wake-up mode.

Read more...
ESP32-C6 achieves PSA-L2
iCorp Technologies DSP, Micros & Memory
Espressif Systems recently announced that its ESP32-C6 microcontroller has achieved PSA Certified Level 2 (PSA-L2) security certification, making it the first RISC-V-based MCU to reach this level.

Read more...
Microprocessor with integrated NPU
Avnet Silica DSP, Micros & Memory
The RZ/G3E from Renesas is a microprocessor integrated with quad CPU and NPU in one chip, improving power efficiency, reliability, and security.

Read more...
Nordic Semiconductor launches nRF Connect SDK Bare Metal option for nRF54L series
Avnet Silica DSP, Micros & Memory
This is a new, RTOS-independent software solution for Bluetooth LE development, designed to ease developers’ migration from the legacy nRF5 SDK and nRF52 series to the next-generation nRF54L series.

Read more...
Dual-core support in NECTO Studio
DSP, Micros & Memory
MIKROE recently announced that version 7.3.0 of its NECTO Studio Integrated Development Environment now supports dual-core MCUs, allowing designers to program and debug each core independently.

Read more...
Post Quantum Cryptographic firmware library
DSP, Micros & Memory
The STM32 post-quantum cryptographic library enables developers to satisfy application requirements for any combination of data integrity, confidentiality, identification/authentication, and nonrepudiation.

Read more...
Converting high voltages without a transformer
Altron Arrow Editor's Choice Power Electronics / Power Management
With appropriate power converter ICs, such as the LTC7897 from Analog Devices, many applications can be suitably powered without having to use complex and cost-intensive transformers.

Read more...
MultiVolt series of oscillators
Future Electronics DSP, Micros & Memory
The ECS-3225MVQ from ECS Inc. is a compact, quartz-based MultiVolt oscillator designed for precision timing in automotive, industrial, and portable electronic systems.

Read more...
MCU platform for battery-powered devices
Altron Arrow DSP, Micros & Memory
The MCX W23 is a new dedicated wireless MCU platform from NXP for battery-powered sensing devices.

Read more...
Drive innovation with AURIX TriCore MCUs
Future Electronics DSP, Micros & Memory
Infineon’s AURIX TriCore family balances safety, performance, and energy efficiency to offer a scalable and future-ready portfolio.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved