Single-chip 16/32-bit microcontrollers
7 April 2004
DSP, Micros & Memory
The LPC2114/LPC2124 from Philips Semiconductors are based on a 16/32 bit ARM7TDMI-S CPU with realtime emulation and embedded trace support, together with 128/256 KB of embedded high speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate (up to 60 MHz operation). For critical code size applications, the alternative 16-bit Thumb Mode reduces code by more than 30% with minimal performance penalty, according to Philips.
These devices have a compact 64 pin package, low power consumption, various 32-bit timers, 4-channel 10-bit ADC, and PWM channels. With 46 GPIO lines with up to nine external interrupt pins these microcontrollers are particularly suitable for industrial control, medical systems, access control and point-of-sale. With a wide range of serial communications interfaces, they are also very well suited for communication gateways, protocol converters and embedded soft modems as well as many other general-purpose applications.
The CPU operating voltage range is 1,8 V (±0,15 V) and I/O power supply range is 3,0 to 3,6 V with 5 V tolerant I/O pads. There are two low power modes - Idle and Power-down.
For more information contact Mutronics (value added distributor), 011 608 1460.
Further reading:
Quad RF ADC/DAC for wideband transceiver design
Altron Arrow
DSP, Micros & Memory
The AD9084 from Analog Devices integrates a quad 16-bit RF digital-to-analogue converter with a maximum sampling rate of 28 GSPS and a quad 12-bit RF analogue-to-digital converter.
Read more...
High-performance FPGA family
EBV Electrolink
DSP, Micros & Memory
AMD’s Kintex UltraScale+ FPGA family delivers high-performance, mid-range field programmable gate arrays that balance price, performance, and power efficiency for demanding DSP applications.
Read more...
Compact and scalable development board
DSP, Micros & Memory
The FRDM-MCXW72 from NXP is a compact and scalable development board for rapid prototyping of the MCX W72 multiprotocol wireless MCU.
Read more...
High-performance processing for cost-aware industrial IoT
Altron Arrow
DSP, Micros & Memory
STMicroelectronics has expanded its industrial processing portfolio with the new STM32MP2 series, a family of application microprocessors designed to deliver higher performance, advanced security and long-term reliability for cost-sensitive industrial IoT systems.
Read more...
Development board for secure industrial and IoT applications
DSP, Micros & Memory
The FRDM-i.MX93 Development Board from NXP is a compact, entry-level platform built around the powerful i.MX 93 applications processor, designed to accelerate prototyping and development for industrial, IoT, and edge computing applications.
Read more...
KIOXIA pioneer new 3D Flash technology
EBV Electrolink
DSP, Micros & Memory
KIOXIA Corporation and Sandisk Corporation pioneered a state-of-the-art 3D flash memory technology, setting the industry benchmark with a 4,8 Gb/s NAND interface speed, superior power efficiency, and heightened density.
Read more...
Ultra-wide signal capture from a single chip
RFiber Solutions
DSP, Micros & Memory
Jariet Technologies developed Electra, a chipset that enables ultra-wide, multi-function and multi-band signal capture and generation from a single component.
Read more...
High-performance processing at the edge
Altron Arrow
DSP, Micros & Memory
STMicroelectronics’ STM32MP23 microprocessor is designed to meet the demands of industrial, IoT, and edge AI applications.
Read more...
High-speed Flash for system-on-chip applications
NuVision Electronics
DSP, Micros & Memory
GigaDevice unveiled the GD25NE series of dual-power supply SPI NOR Flash chips, designed specifically for 1,2 V SoC applications.
Read more...
Ultra-low-power Arm Cortex MCU with FPU
Altron Arrow
DSP, Micros & Memory
STMicroelectronics expanded its STM32 ultra-low-power family with the launch of the STM32U3 for cost-sensitive applications in industrial, medical, and consumer electronics devices.
Read more...
printer friendly version