Computer/Embedded Technology


PC/104plus board with MiniPCI slot for multiple network applications

19 May 2004 Computer/Embedded Technology

Digital-Logic offers a PC/104plus compatible board with integrated MiniPCI (mini peripheral component interconnect) slot. Specified by the PCI special interest group and in general used in the notebook industry, this slot enables the use of MiniPCI cards in PC/104plus computer systems. Due to its small dimensions - similar to those of a SODIMM memory card - MiniPCI cards are the ideal solution to extend PC/104plus boards with modem, ISDN, WLAN and LAN functions or customised applications.

The 32-bit PCI bus board (MSMP104+) is equipped with an RJ45 connector and can be used together with any PC/104plus CPU board. The 90 x 96 x 20 mm board requires a 5 V/50 mA (without MiniPCI card) power supply and operates within -25 to +70°C (-40 to +85°C available).



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

From idea to intelligent product
TRX Electronics Computer/Embedded Technology
Mouser Electronics has announced a new eBook in collaboration with Arduino – From Blink to Think: How Arduino UNO Q Helps Designers Go from Idea to Intelligent Product.

Read more...
Think Diamond Long-life COM-based SBCs
Electronic Products Design Computer/Embedded Technology
A COM-based SBC combines the flexibility of a standard computer-on-module (COM) with a baseboard offering additional I/O, expansion sockets, power supplies, and I/O connectors. The result is a highly flexible, highly expandable, feature-dense product that can be adapted to the widest range of applications, offering maximum product lifetime.

Read more...
Next-Gen Min-ITX motherboard
Vepac Electronics Computer/Embedded Technology
Adding to AAEON’s extensive industrial motherboard portfolio, the Next-Gen MIX-Q870A1 is the company’s most advanced Mini-ITX board to date.

Read more...
Rev 2.0 PolarFire FPGA ethernet sensor bridge
Altron Arrow Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.

Read more...
Rugged combo antennas cut multi-network installations down to one
iCorp Technologies Computer/Embedded Technology
Quectel Wireless Solutions has expanded its antenna portfolio with four rugged multi-network combo antennas.

Read more...
Intelligent video processing
Rugged Interconnect Technologies Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.

Read more...
Quectel’s single-board computers put industrial edge computing on one PCB
iCorp Technologies Computer/Embedded Technology
Quectel Pi series of single-board computers (SBCs), designed for a broad range of industrial applications, include three compact development platforms – the Quectel Pi M1, L1, and H1 boards.

Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.

Read more...
Arrival of the Epic-PTH9
Vepac Electronics Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.

Read more...
EPS-9600 Managed Layer 3 Ethernet Switch with next-generation Time- Sensitive Networking
Electronic Products Design Computer/Embedded Technology
Diamond Systems has introduced EPS-9610 (part of the EPS-9600 family), a rugged, ultra-compact embedded Ethernet switch which integrates military-grade ruggedness with next-generation Time-Sensitive Networking (TSN) capabilities.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved