Analogue, Mixed Signal, LSI


Analog temperature sensor accurate to ±0,5°C

2 June 2004 Analogue, Mixed Signal, LSI

Dallas Semiconductor's temperature sensor chip, the DS600, is a ±0,5°C (max) accurate analog-output temperature sensor. The device comes factory calibrated and has a linear-voltage output characteristic, making it simple to use and implement in designs. The high accuracy and ease of use make it ideal for applications such as cold-junction compensation for high-precision thermocouples, replacing costly RTDs or existing accurate analog temperature sensors. The DS600 is also suited for medical, automotive, and industrial applications.

The DS600 measures its own temperature and outputs a voltage proportional to degrees centigrade. The voltage output has a +6,45 mV/°C (typ) sensitivity and a +509 mV d.c. offset, which allows negative temperatures to be easily measured and reported. The device's ±0,5°C (max) accuracy is rated over the 2,7 to 5,5 V operating voltage range and a -20°C to +100°C temperature range. Outside this range it is ±0,75°C (max) accurate to -40°C and +125°C.

The device also contains a thermostat function with a user-defined threshold and an internal comparator to ensure high-precision threshold detection. Power consumption is 140 µA (max) 2,5 µA in shutdown. The DS600 comes in an 8-pin microSOP-EP package.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

5G mobile hotspot with integrated multimodal AI capabilities
CST Electronics Computer/Embedded Technology
MeiG Smart has launched its first 5G Mobile HotSpot solution, the SRT8710, a breakthrough in mobile connectivity that combines ultra-fast 5G communications with integrated multimodal artificial intelligence functions.

Read more...
Smart IMU for high/low-g acceleration
Altron Arrow Analogue, Mixed Signal, LSI
The ISM6HG256X is a 6-axis intelligent inertial measurement unit that enables smart motion sensing, edge computing, and real-time awareness.

Read more...
Compact Schottky diodes increase efficiency
RS South Africa Analogue, Mixed Signal, LSI
Gen 3 SiC Schottky diodes from Vishay in the compact SlimSMA HV package increase efficiency while enhancing electrical insulation.

Read more...
Silanna launches Plural ADC EVKs
Analogue, Mixed Signal, LSI
Silanna Semiconductor has released its first evaluation kits for the Plural data converter family to offer the fastest, most cost-effective way to evaluate and deploy high-performance ADCs.

Read more...
High speed, low noise 2 A driver
iCorp Technologies Analogue, Mixed Signal, LSI
The SGM8423-2A from SGMICRO is a high efficiency, class AB, low distortion power line driver optimised to accept a signal from a Power Line Carrier modem.

Read more...
Online sensor technology hub
Analogue, Mixed Signal, LSI
Mouser’s sensor content hub offers an extensive collection of articles, blogs, eBooks, and product information from its technical experts and leading manufacturing partners.

Read more...
Ultra-low power MEMS accelerometer
Altron Arrow Analogue, Mixed Signal, LSI
Analog Devices’ ADXL366 is an ultra-low power, 3-axis MEMS accelerometer that consumes only 0,96 µA at a 100 Hz output data rate and 191 nA when in motion-triggered wake-up mode.

Read more...
NeoMesh on LoRa
CST Electronics Telecoms, Datacoms, Wireless, IoT
Thomas Steen Halkier, CEO of NeoCortec, recently gave a keynote speech where he spoke about “NeoMesh on LoRa: Bringing true mesh networking to the LoRa PHY”.

Read more...
BT Audio 4 Click board
Dizzy Enterprises Analogue, Mixed Signal, LSI
The BT Audio 4 Click board from MIKROE provides high-quality wireless audio streaming and data comms over Bluetooth.

Read more...
Precision MEMS IMU modules
Altron Arrow Analogue, Mixed Signal, LSI
The ADIS16575/ADIS16576/ADIS16577 from Analog Devices are precision, MEMS IMUs that includes a triaxial gyroscope and a triaxial accelerometer.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved