Ethernet-based data acquisition and control systems
3 November 2004
Computer/Embedded Technology
The Advantech ADAM-5000 Ethernet-based data acquisition and control systems from ProMicro are designed to acquire data and to monitor and control processes through multichannel I/O modules. The ADAM-5000 modules are capable of handling up to 128 I/O points, and depending on the layout and the number of I/O points, the user can configure as many systems as required for the application. The 16-bit microprocessor and FIFO circuitry accelerates communication speeds. Its 115,2 Kbps is much faster than conventional RS485 networks.
Included in the main unit are a CPU card, a power regulator, a 4- or 8-slot base and communication port. If required, the ADAM-5000 is upgradable simply by changing the main unit, without changing existing modules.
A three-way isolation design prevents ground loops and reduces the effects of electric noise in the system, as well as providing surge protection. A watchdog timer monitors the microprocessor and automatically resets the system. Various types of system or I/O module failures are detected by the hardware self-test or by software diagnosis.
Analog input modules can be configured to accept several ranges of voltage, current, thermocouple or RTD input. With the exception of the system node address, all parameters can be set remotely. ADAM-5000 distributed data acquisition and control systems are supported by most standard process control or HMI software.
Further reading:
New generation of SBCs
Computer/Embedded Technology
HardKernel’s new generation of ODROID H4-series SBCs are more powerful; offering higher performance and richer interfaces than previous generations.
Read more...
Smallest 13th gen Intel SBC
Vepac Electronics
Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.
Read more...
Versatile PoE extender
Vepac Electronics
Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.
Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink
Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.
Read more...
QuecPi smart development board
iCorp Technologies
Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.
Read more...
Eskom announces PV registration extension
Computer/Embedded Technology
The South African Photovoltaic Industry Association has welcomed Eskom’s decision to extend its zero-registration fee policy and free smart meter installation for residential Small-Scale Embedded Generation customers until March 2026.
Read more...
Unlock enhanced wireless performance
Computer/Embedded Technology
Duxbury Networking has introduced Cambium Networks’ Deep Virtual Circuit (Deep VC) technology, a free upgrade for the PMP 450 platform that will transform wireless broadband performance across the country.
Read more...
Computing in industrial environments
Vepac Electronics
Computer/Embedded Technology
The Panasonic Toughbook CF-33/CF33 Tablet is a 12,0-inch fully rugged device with hot-swappable twin batteries and highly configurable capabilities.
Read more...
DDR5 DRAM series
Vepac Electronics
Computer/Embedded Technology
Innodisk has announced its DDR5 6400 DRAM series featuring the industry’s largest 64GB single-module capacity.
Read more...
Generate waveforms at 10 GS/s
Vepac Electronics
Computer/Embedded Technology
New flagship arbitrary waveform generator cards from Spectrum Instrumentation generate waveforms with 2,5 GHz bandwidth and 16-bit vertical resolution.
Read more...
printer friendly version