Telecoms, Datacoms, Wireless, IoT


Synchronous clock module offers turnkey solution

8 November 2000 Telecoms, Datacoms, Wireless, IoT

Raltron's Stratum-3 synchronous clock module for telecom network synchronisation and wireless communication systems is a semi-custom subsystem that offloads costly design engineering tasks and offers a turnkey solution to many complex challenges of communication systems design.

Based on DSP techniques, the SY-0001 sync module features its own Stratum-3 OCXO, two independent inputs of any reference frequency from 8 kHz to 77,76 MHz and a DSP phase-locked loop with a bandwidth of only 0,1 Hz that eliminates jitter in any incoming signal. DSP coefficients are uniquely held on-board in flash memory and so provide a high degree of user flexibility.

"If after installation you need to alter, say, a 3 dB point, all you have to do is download the new DSP coefficients into flash memory," notes Ramon Cerda, Raltron Product Manager. Other flexibility features include two external reference frequencies; control inputs via header pins, J-TAG or SCI connectors and three packaging options - a hermetically sealed metal box for severe environments, an EMI-protected metal enclosure or an open circuit board for low-profile installations.

"This new timing module reduces inventory parts count and offers freedom from test engineering and cost", said Cerda. "It offers the security of known performance to Bellcore GR-1244 specifications and provides freedom from critical design minutiae so that system designers can concentrate on higher-level design tasks with confidence. It speeds time-to-market, reduces size and improves manufacturability."





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

What does Wi-Fi 7 mean for South African networks?
Telecoms, Datacoms, Wireless, IoT
With Wi-Fi 7 (802.11be), we are finally looking at a standard that was built, not just for more devices, but for the new way networks are used.

Read more...
Multiprotocol wireless SoC
RF Design Telecoms, Datacoms, Wireless, IoT
The nRF54LM20A from Nordic Semiconductor is a multiprotocol wireless System-on-Chip designed for demanding designs in Bluetooth devices.

Read more...
High performance communication
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Quectel’s FCS950R is a high-performance Wi-Fi 5 and Bluetooth 4.2 module that can deliver a maximum data rate up to 433,3 Mbps in 802.11ac mode.

Read more...
Expanded STM32WL3x line for IoT sensors
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The STM32WL31x and STM32WL30x are more tailored versions of the STM32WL33x for designers who wish to focus on specific features, while lowering their bill of materials.

Read more...
Full-band GNSS helical antenna
RF Design Telecoms, Datacoms, Wireless, IoT
A key feature of Calian’s HC3990XF antenna design is that it does not require a ground plane, making it ideal for size-constrained applications.

Read more...
BLE and BT Mesh module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The HM-BT4531 from HOPERF is a BLE data transmission module that features an ARM Cortex-M0 32-bit processor.

Read more...
Espressif entering the Wi-Fi 6E market
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Espressif Systems is entering the Wi-Fi 6E market, extending its connectivity portfolio into the domain of high-throughput, low-latency wireless solutions.

Read more...
Ultra-low jitter clock buffers
Altron Arrow Telecoms, Datacoms, Wireless, IoT
New SKY53510/80/40 family of clock fanout buffers from Skyworks are purpose-built for data centres, wireless networks, and PCIe Gen 7 applications.

Read more...
Cutting-edge broadband power amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
Designed for high efficiency and reliability, the WPGM0206012M from WAVEPIA is a cutting-edge broadband GaN MMIC power amplifier operating from 500 MHz to 8,5 GHz.

Read more...
The trends driving uptake of IoT Platform as a Service
Trinity IoT Editor's Choice Telecoms, Datacoms, Wireless, IoT
IoT platforms, delivered as a service, are the key that will enable enterprises to leverage a number of growing trends within the IT space, and access a range of benefits that will help them grow their businesses.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved