|
|
New GSM/GPRS wireless communication OEM device
9 March 2005, Telecoms, Datacoms, Wireless, IoT
RF Design has extended its wireless communication products portfolio with the addition of Telit to its line card. Telit is a world leader in the design, development and manufacturing of mobile and wireless communication devices such as GSM/GPRS handsets and OEM modules.
Telit's latest product is the Trizium module. The Telit Trizium is a small lightweight, SMD component with low power consumption. The small 31,3 x 41,4 x 3,6 mm BGA-packaged device allows digital communications services wherever there is a GSM 900, DCS 1800 and PCS 1900 MHz network, or GPRS class 10.
The GPRS TCP/IP stack is included, as well as hardware and software support for a colour camera. The module has an extended temperature range of -25 to +75°C and its lack of connectors enhances the device's reliability in the end-use application and helps lower costs.
The Trizium is supported by extensive documentation, a ready-to-use Trizium Reference Board and a complete Trizium Evaluation Kit which interfaces the Trizium module to appropriate power supplies, external SIM card reader, RS232 port, handset and hands-free connections.
The Trizium is designed for M2M Industrial or Consumer wireless applications such as remote meter billing, vending machines, automotive applications and fleet management, emergency services, security systems, environmental monitoring, pos terminals, PDA handheld devices and smartphones. For more information contact Andrew Hutton, RF Design, +27 (0)11 695 2200, andrew@rfdesign.co.za |
|
|
|
| Share: |
 |
Via email client |
 |
 |
 |
 |
print |
|
|
|
|
|
Further reading:
- Bluetooth LE pass-through module
26 June 2019, Icorp Technologies, Telecoms, Datacoms, Wireless, IoT
The HM-BT4501 from HopeRF is a wireless data pass-through module based on a CMT4501 low-power Bluetooth 5.0 chip. By connecting with a microcontroller, it can be used to realise a connection and data ...
- Positioning module for autonomous driving
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The ZED-F9K from u-blox is a high-precision multiband GNSS (global navigation satellite system) module with built-in inertial sensors. The module combines the latest generation of GNSS receiver technology, ...
- Automotive smart hub ICs
26 June 2019, Avnet South Africa, Telecoms, Datacoms, Wireless, IoT
Microchip Technology has added new single-port USB smart hub ICs to its family of USB automotive products. The USB4912 and the USB4712 can be used to add a single port under the radio, in the centre console ...
- Wideband amplifier for instrumentation
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions announced a new wideband distributed amplifier with the introduction of the MAAM-011275-DIE. Offered as a bare die, this amplifier is well suited for use in test and measurement ...
- Positioning and cellular antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Tycho MA310 antenna is a combination, small form factor GPS/GLONASS and penta-band cellular (GSM/GPRS/CDMA/ PCS/DCS/ WCDMA/UMTS) antenna to simplify AVL or fleet management antenna systems worldwide.
Made ...
- RF power doubler
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The QPA3357 from Qorvo is a power doubler that operates from 47 to 1218 MHz. It provides an output power of 57 dBm, a gain of 28 dB, and has a noise figure of 4,5 dB. This power doubler is matched to ...
- Ka-band power amplifier
26 June 2019, RFiber Solutions, Telecoms, Datacoms, Wireless, IoT
MACOM Technology Solutions’ new MAAP-011250 is a balanced 4 W power amplifier (PA) operating from 27,5 – 30 GHz, making it well suited for SATCOM and VSAT applications.
With the addition of this new ...
- Flexible wideband antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The Taoglas FXUB64.18.0150C flexible wideband antenna has been designed to cover all working frequencies in the 600-3000 MHz spectrum, covering all cellular, 2,4 GHz Wi-Fi, ISM, NB-IoT, CAT-M1 and A-GPS ...
- High-frequency power dividers
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
Pasternack has launched a new series of high-frequency power dividers targeted at 5G cellular communication, automotive radar and satellite communication applications.
The lineup consists of 17 new ...
- Cellular module for LPWA applications
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
u-blox has announced the SARA R5 series of LTE M and NB-IoT modules for low power wide area (LPWA) IoT applications. The module, built on the UBX R5 cellular chipset and the M8 GNSS receiver chip, is ...
- Hinged 4G LTE antenna
26 June 2019, RF Design, Telecoms, Datacoms, Wireless, IoT
The hinged Apex II TG.35 wideband dipole antenna from Taoglas has been designed to cover all cellular, ISM and Wi-Fi working frequencies in the 600-6000 MHz spectrum. It has been primarily designed for ...
- Dual-band GNSS module
26 June 2019, Icorp Technologies, Telecoms, Datacoms, Wireless, IoT
The Quectel LC79D is a compact dual-band GNSS module with support for L1 and L5 bands for satellites to improve positioning accuracy.
Featuring concurrent multi-constellation GNSS receivers on dual ...
|
|
