Modules offer high-channel-count digital I/O
20 April 2005
Computer/Embedded Technology
National Instruments' Compact FieldPoint device, the cFP/FP-DIO-550, is a 16-channel digital input/digital output module that measures eight digital inputs with a range of 11 to 30 V d.c. and sources eight outputs from 10 to 30 V d.c. with 250 mA per channel. The cFP-AI-118, is an eight-channel analog input module that measures eight analog inputs at 16-bit resolution and offers a 10 kSaps per channel sampling rate with a range of zero to 1, 5, 10 or 15 V, and ±1, ±5, ±10 or ±15 V.
The cFP/FP-DIO-550 offers both digital input and digital output channels, effectively replacing two modules with a single module. It delivers 250 V CAT II safety isolation to backplane, as well as interfacing for discrete sensors and actuators. This module offers a user-selectable input filter and has a range of 1 μs to 65 ms.
In addition to high resolution and simultaneous sampling, the cFP-AI-118 is a dual port memory module, significantly reducing system jitter. This module also features 750 Vrms channel-to-channel isolation and 2300 Vrms channel-to-backplane isolation.
These devices are well-suited for industrial control applications that require multiple types of inputs and outputs in one bank, or where high-voltage channel-to-channel isolation is essential due to ground loops and similar conditions that could damage control equipment.
For more information contact NI South Africa, 0800 203 199.
Further reading:
From idea to intelligent product
TRX Electronics
Computer/Embedded Technology
Mouser Electronics has announced a new eBook in collaboration with Arduino – From Blink to Think: How Arduino UNO Q Helps Designers Go from Idea to Intelligent Product.
Read more...
Think Diamond Long-life COM-based SBCs
Electronic Products Design
Computer/Embedded Technology
A COM-based SBC combines the flexibility of a standard computer-on-module (COM) with a baseboard offering additional I/O, expansion sockets, power supplies, and I/O connectors. The result is a highly flexible, highly expandable, feature-dense product that can be adapted to the widest range of applications, offering maximum product lifetime.
Read more...
Next-Gen Min-ITX motherboard
Vepac Electronics
Computer/Embedded Technology
Adding to AAEON’s extensive industrial motherboard portfolio, the Next-Gen MIX-Q870A1 is the company’s most advanced Mini-ITX board to date.
Read more...
Rev 2.0 PolarFire FPGA ethernet sensor bridge
Altron Arrow
Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.
Read more...
Rugged combo antennas cut multi-network installations down to one
iCorp Technologies
Computer/Embedded Technology
Quectel Wireless Solutions has expanded its antenna portfolio with four rugged multi-network combo antennas.
Read more...
Intelligent video processing
Rugged Interconnect Technologies
Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.
Read more...
Quectel’s single-board computers put industrial edge computing on one PCB
iCorp Technologies
Computer/Embedded Technology
Quectel Pi series of single-board computers (SBCs), designed for a broad range of industrial applications, include three compact development platforms – the Quectel Pi M1, L1, and H1 boards.
Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design
Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.
Read more...
Arrival of the Epic-PTH9
Vepac Electronics
Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.
Read more...
EPS-9600 Managed Layer 3 Ethernet Switch with next-generation Time- Sensitive Networking
Electronic Products Design
Computer/Embedded Technology
Diamond Systems has introduced EPS-9610 (part of the EPS-9600 family), a rugged, ultra-compact embedded Ethernet switch which integrates military-grade ruggedness with next-generation Time-Sensitive Networking (TSN) capabilities.
Read more...
printer friendly version