The THS6184 is a dual-port, low-power current feedback differential line driver amplifier system from Texas Instruments for xDSL systems. It has very low-power dissipation making it well-suited for ADSL, ADSL2, ADSL2+, and ADSL2++ systems that must achieve high densities in ADSL central office rack applications by combining two ports, or four amplifiers, into one package.
The unique architecture of the device allows the trimmed quiescent current to be much lower than existing line drivers while still achieving high linearity. Distortion at these low-power levels is good with -73 dBc THD at 1 MHz with the low bias mode of 4,3 mA/port. Fixed and variable multiple-bias settings of the amplifiers allows for enhanced power savings for line lengths where the full performance of the amplifier is not required.
The wide output swing of 44 V pp differentially with ±12 V power supplies coupled with over 410 mA current drive allow for wide dynamic headroom, keeping distortion minimised. The THS6184 output stage incorporates extra catch-diodes to the power supply to minimise the external protection required in CO systems. With a low 2,9 nV/rt.Hz voltage noise coupled with a low 5,7 pA/rt.Hz inverting current noise, the THS6184 increases the sensitivity of the receive signals allowing for better margins and reach.
For more information contact Les Bidgood, Arrow Altech Distribution, +27 (0)11 923 9600, [email protected]
Mobile satellite connectivity available in SA
Telecoms, Datacoms, Wireless, IoT
Space42 has commercially launched its next generation mobile satellite service, Thuraya 4 NGS, available in South Africa as of February 2026.
Read more...Next-gen Wi Fi 6E connectivity for embedded systems iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Espressif Systems has expanded its connectivity portfolio with the introduction of the ESP32-E22, the company’s first Wi-Fi 6E connectivity co-processor.
Read more...Quectel redefines connectivity with RG660Qx 5G Series iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Purpose-built to meet the demands of next-generation IoT and wireless broadband, these modules leverage the cutting-edge Qualcomm X85 and X82 5G Modem-RF systems to deliver enterprise-grade performance.
Read more...NXP has expanded its MCX A Series Altron Arrow
AI & ML
NXP has significantly expanded its MCX A Series of Arm Cortex-M33 microcontrollers, doubling the portfolio with six new families aimed at industrial and IoT edge applications.
Read more...Contactless IO-Link couplers IOT Electronics
Telecoms, Datacoms, Wireless, IoT
The IO-Link couplers from Phoenix Contact are industrial contactless couplers designed to transmit power and IO-Link data across a small air gap without physical connectors.
Read more...Quectel’s RG255C-NA and RM255C-GL accelerate 5G RedCap adoption iCorp Technologies
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Quectel’s RG255C-NA and RM255C-GL modules represent a strategic move into this fast-growing segment, delivering Sub-6 GHz 5G connectivity optimised for mid-tier IoT applications.
Read more...SDRs – Which RF architecture should you choose? RFiber Solutions
Editor's Choice Telecoms, Datacoms, Wireless, IoT
There are several common methods of implementing SDR architectures. This paper discusses which is best when meeting a specific need.
Read more...Multi-band GNSS patch antenna RF Design
Telecoms, Datacoms, Wireless, IoT
The Taoglas AHP2356A is a compact, high-performance active GNSS patch antenna designed for next-generation positioning systems requiring precision, reliability, and multi-constellation support.
Read more...Cellular routers for explosive areas Phoenix Contact
Telecoms, Datacoms, Wireless, IoT
Updated versions of the Cellulink outdoor cellular router product range from Phoenix Contact are now available; they have been specially developed for use in Zone 2 potentially explosive areas.
Read more...Power the next wave of IoT innovation Links Field Networks
Telecoms, Datacoms, Wireless, IoT
Links Field Networks’ portfolio includes connectivity platforms, edge devices, and network management tools designed to support secure, resilient IoT deployments across a range of use cases.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version