Computer/Embedded Technology


PCI communication cards

8 February 2006 Computer/Embedded Technology

A range of PCI communication cards with speeds of up to 921,6 Kbps is available from Advantech. I/O addressing is automatically assigned by the PCI plug-and-play capability.

The board requires only one PCI slot within the PC and provides independent serial channels. All channels are addressed in a continuous 32 byte I/O block for simplified software access and all channels may share one PCI interrupt. An interrupt status register is available for determining the interrupt source.

The PCI-1601/20 range is supplied as two-, four-, and eight-port configurations with standard 16PCI954 UARTs containing 128 byte FIFOs that greatly reduce CPU load. This makes the cards ideal for heavy-duty, multitasking environments, says Advantech.

Optical isolation of up to 3000 V d.c. is provided to protect the PC and equipment against ground loops, increasing system reliability in harsh environments. Optional surge protection is available to protect equipment against high voltage surges of up to 2500 V d.c.

A function library provides over 50 easy-to-use APIs especially designed for serial communication. The RS485 network with automatic data flow control utilises the RS232 software which automatically senses the direction of incoming data and switches its transmission direction accordingly, making it look and act like an RS232 network.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Rugged, I/O-rich NVIDIA Jetson solutions
Electronic Products Design Computer/Embedded Technology
Developed for the NVIDIA Jetson AGX Orin, the Osbourne carrier and development kit is a compact and rugged platform designed to support a wide range of embedded AI and edge computing applications.

Read more...
New generation of SBCs
Computer/Embedded Technology
HardKernel’s new generation of ODROID H4-series SBCs are more powerful; offering higher performance and richer interfaces than previous generations.

Read more...
Smallest 13th gen Intel SBC
Vepac Electronics Computer/Embedded Technology
At just 86 x 55 mm, the de next-RAP8 continues AAEON’s run of producing record-breaking single-board computers with embedded Intel technology.

Read more...
Versatile PoE extender
Vepac Electronics Computer/Embedded Technology
The GP-101ET PoE+ Extender is a 1-port Gigabit PoE extender with plug and play installation requiring neither configuration nor extra electrical power.

Read more...
First NVMe SSD Built with 8th-gen BiCS FLASH
EBV Electrolink Computer/Embedded Technology
KIOXIA recently announced the development and prototype demonstration of its new KIOXIA CM9 Series PCIe 5.0 NVMe SSDs, which incorporates CMOS directly Bonded to Array technology.

Read more...
QuecPi smart development board
iCorp Technologies Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.

Read more...
Eskom announces PV registration extension
Computer/Embedded Technology
The South African Photovoltaic Industry Association has welcomed Eskom’s decision to extend its zero-registration fee policy and free smart meter installation for residential Small-Scale Embedded Generation customers until March 2026.

Read more...
Unlock enhanced wireless performance
Computer/Embedded Technology
Duxbury Networking has introduced Cambium Networks’ Deep Virtual Circuit (Deep VC) technology, a free upgrade for the PMP 450 platform that will transform wireless broadband performance across the country.

Read more...
Computing in industrial environments
Vepac Electronics Computer/Embedded Technology
The Panasonic Toughbook CF-33/CF33 Tablet is a 12,0-inch fully rugged device with hot-swappable twin batteries and highly configurable capabilities.

Read more...
DDR5 DRAM series
Vepac Electronics Computer/Embedded Technology
Innodisk has announced its DDR5 6400 DRAM series featuring the industry’s largest 64GB single-module capacity.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved