Hittite Microwave has released two GaAs pHEMT MMIC Low Noise Amplifiers which are suitable for cellular/3G basestation and repeater applications. The HMC376LP3E and the HMC382LP3E are GaAs PHEMT MMIC low noise amplifiers which operate from 700 to 1000 MHz, and 1700 to 2200 MHz, respectively.
These new LNAs require little or no external matching, and are footprint/pinout compatible such that a single PCB design can be used to implement either part number. With noise figures as low as 0,6 dB, and up to +36 dBm of output IP3, the HMC376LP3E and the HMC382LP3E MMIC LNAs are suitable for front-end receivers, and repeaters in GSM/GPRS, CDMA, WCDMA, and TD-SCDMA applications.
These wide dynamic range LNAs are housed in RoHS-compliant 3 x 3 mm leadless QFN packages, operate from a single +5 V supply, and feature an externally adjustable supply current that enables the designer to tailor the power consumption and linearity performance for any application.
How are end-launch PCB connectors useful? 29 April 2020, RF Design
, Interconnection
There has been an increasing use of RF coaxial connectors, especially microwave and millimetre-wave coaxial connectors, for high-speed digital and precision sensing applications, There is also a growing ...
Read more...RF variable attenuators 29 April 2020, RF Design
, Telecoms, Datacoms, Wireless, IoT
The AN7 Thermopad series from Smiths Interconnect are temperature variable chip attenuators that operate from DC to 6 GHz. The Thermopad is a totally passive absorptive microwave attenuator, which provides ...
Read more...V2X made more accessible by new u-blox module 29 April 2020, RF Design
, Telecoms, Datacoms, Wireless, IoT
u-blox announced its latest contribution to vehicle-to-everything (V2X) technology: the VERA P3 V2X module. Based on the u-blox UBX P3 V2X chip, VERA P3 puts automotive OEMs, Tier 1s and manufacturers ...
Read more...Bluetooth evaluation kit 29 April 2020, Altron Arrow
, Telecoms, Datacoms, Wireless, IoT
The Cypress CYW920719B2Q40EVB-01 evaluation kit enables users to evaluate and develop single-chip Bluetooth applications using the CYW20719, an ultra-low-power dual-mode Bluetooth 5.0 wireless MCU (microcontroller) ...
Read more...Easy-to-use Wi-Fi module 29 April 2020, iCorp Technologies
, Telecoms, Datacoms, Wireless, IoT
The ESP-07S Wi-Fi module was developed by Ai-Thinker Technology. The core processor ESP8266 integrates the advanced Tensilica L106 ultra-low-power, 32-bit MCU (microcontroller) in a small package with ...
Read more...X-band GaN power amplifier 29 May 2020, RF Design
, Telecoms, Datacoms, Wireless, IoT
The QPA2611 from Qorvo is an X-band GaN power amplifier (PA) that operates from 8 to 12 GHz. It delivers more than 5 W of saturated output power with a large signal gain of 26 dB and PAE (power added ...
Read more...Bluetooth and Wi-Fi combo module 29 May 2020, iCorp Technologies
, Telecoms, Datacoms, Wireless, IoT
FSC-BW121 is a Bluetooth and Wi-Fi combo RF module which supports both Bluetooth 4.2 dual mode and Wi-Fi 802.11 a/b/g/n/ac standards. It requires an external MCU (microcontroller) to execute a Bluetooth ...
Read more...4G serial routers 29 May 2020, iCorp Technologies
, Telecoms, Datacoms, Wireless, IoT
The 4G serial server devices HF2421 and HF2421G provide protocol conversion between RS-232/RS-485/RS-422 interfaces and Ethernet/Wi-Fi and 3G/4G, which can meet the solution requirements for serial/network ...
Read more...WLAN MIMO antenna with four ports 29 May 2020, RF Design
, Telecoms, Datacoms, Wireless, IoT
The FXP.524 Venti antenna is a 4-in-1 MIMO, flexible PCB monopole type antenna. Made by Taoglas, the antenna has excellent efficiency and isolation performance for dual-band Wi-Fi applications.
It has ...
Read more...Out-of-the-box spoofing mitigation with Galileo’s OS-NMA service 29 May 2020, RF Design
, Telecoms, Datacoms, Wireless, IoT
Over the past two decades, satellite-based positioning has become an indispensable, everyday technology that we constantly rely on – often even without being aware of it.
With the relentless expansion ...
printer friendly version