Telecoms, Datacoms, Wireless, IoT


Multistandard modem includes high-quality DTMF decoder

28 June 2006 Telecoms, Datacoms, Wireless, IoT

The CMX867A is a member of CML's wireline modem IC family. This is an enhanced V.22 multistandard modem IC, specifically targeted at telephone-based information systems.

The key feature of the device is the inclusion of a high-quality DTMF decoder, offering superior immunity to falsing on voice, increasing the applications to which this advanced modem IC is suited. Operations such as those met in industrial control systems, security systems, telephone telemetry and advanced payphones are but a few of the CMX867A's target applications.

Control and data transfer is via a simple high-speed serial bus, compatible with standard microcontroller interfaces. Data transfer is conveniently handled by user-selected 8-bit bytes or 16-bit words via on-chip, programmable Tx and Rx USARTs. Supported formats are either transparent synchronous data or multiformat asynchronous data compatible with ITU V.14 recommendations.

The device features a ringing-signal/line-reversal detector that continues to function when the device is in its Powersave mode, providing an interrupt which can be used to wake-up the host controller when these signals are detected. A hook-switch/relay-drive output, software gain controls and DTMF transmit twist compensation complete the DAA controller. Flexible line-drivers and a receiver hybrid are integrated on-chip, requiring only passive external components to operate in a 2-wire or 4-wire line interface.

The CMX867A operates from a single 2,7 to 5,5 V supply and is available in 24-pin TSSOP, SOIC and DIP packages.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Quectel partners with GEODNET
Quectel Wireless Solutions Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has partnered with GEODNET to deliver Quectel’s Real-Time Kinematic (RTK) correction services, enabling high-precision positioning for IoT applications.

Read more...
Bringing Bluetooth Channel Sounding to automotive and beyond with KW47
Altron Arrow Telecoms, Datacoms, Wireless, IoT
NXP’s new Channel Sounding-certified KW47 and MCX W72 wireless MCUs are set to help automakers with distance measurement, bringing an additional ranging solution for car access and autonomous systems, and will be utilised across a broader spectrum of applications.

Read more...
Dual-band GNSS antenna
RF Design Telecoms, Datacoms, Wireless, IoT
The Taoglas Accura GVLB258.A, is a passive, dual-band GNSS L1/L5, high-performance antenna for high precision GNSS accuracy and fast positioning.

Read more...
What is Wi-Fi HaLow and why choose it for IoT?
iCorp Technologies Editor's Choice Telecoms, Datacoms, Wireless, IoT
Wi-Fi HaLow introduces a low power connectivity option that, in contrast to other Wi-Fi options, offers greater range of approximately 1 km, which opens up a raft of IoT use cases.

Read more...
Wi-Fi 6 and Bluetooth LE coprocessor module
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The ST67W611M1 from STMicroelectronics boasts an all-in-one design which, together with its capabilities, contribute to making it an attractive choice for IoT edge devices requiring a single-chip solution.

Read more...
Futureproofing IoT connectivity
SIMcontrol Telecoms, Datacoms, Wireless, IoT
A managed private APN assigns every device to an isolated carrier slice, producing a single ingress to the enterprise network, with traffic bypassing shared internet paths and reducing exposure.

Read more...
Extra slim 2,4 GHz radio module
Telecoms, Datacoms, Wireless, IoT
The Thyone I radio module from Würth Elektronik now has a little sibling: Thyone-e, which takes up 30% less space and represents a cost-effective alternative for applications in which the long-range mode is not required.

Read more...
Wi-Fi 6 plus Bluetooth LE SoC
Altron Arrow Telecoms, Datacoms, Wireless, IoT
Silicon Labs’ SiWx917M SoC is the company’s lowest power Wi-Fi 6 SoC, ideal for ultra-low power IoT wireless devices using Wi-Fi, Bluetooth, Matter, and IP networking for secure cloud connectivity.

Read more...
Two Bluetooth protocols – one module
Telecoms, Datacoms, Wireless, IoT
Würth Elektronik has introduced its Skoll-I, a compact wireless module that combines both Bluetooth Classic and Bluetooth Low Energy version 5.4 into a single solution.

Read more...
Compact high-performance antennas
Electrocomp Telecoms, Datacoms, Wireless, IoT
KYOCERA AVX offers a variety of extremely compact and high-performance internal, on-board, multiprotocol 2,4 GHz antennas ideal for use in SiP applications.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved