Equipped with two cost-saving, energy efficient Dual-Core Intel Xeon processors (5000 series/LGA711 socket), a redundant power supply unit, a hot swappable RAID 0/1/5 subsystem and an optional IPMI system hardware management module, the new 19-inch/4U Kontron Industrial Silent Server, or KISS-4U, is built for applications requiring speed, long life and robustness.
The server is powered by two dual-core 64-bit server processors with a front side bus speed of up to 1,333 GHz. It is designed for symmetric multiprocessing across two independent front side bus interfaces and is equipped with the Intel 5000 V memory controller hub (MCH), and the Intel enterprise south bridge 2 (ESB2). Each front side bus uses a 64-bit wide, 1333 MHz data bus that transfers data at 10,7 GBps. Up to six fully buffered DIMM modules and up to 16 GB are supported, providing a total memory bandwidth of up to 17,0 GBps.
The KISS-4U server is based on the Intel dual-core NetBurst microarchitecture; it offers substantial functionality enhancements while remaining compatible with the 32-bit instruction set software: features include Intel Hyper-Threading Technology, Virtualisation Technology, Hyper Pipelined Technology, Execution Trace Cache, Thermal Monitor 1/2 (TM1/TM2), Enhanced Intel SpeedStep technology, Advanced Dynamic Execution, Advanced Transfer Cache, Streaming SIMD Extensions 3 (SSE3) and Extended Memory 64 Technology (EM64T). These features allow the server to operate at high speeds, with good power management, in safe thermal environments.
In addition, this server offers a wide range of RAS features, including memory interface ECC, x4/x8 Single Device Data Correction, CRC, parity protection, memory mirroring and memory sparing. This makes it ideal for high performance dual processing in enterprise server environments and for high-availability embedded applications in automation, medical technology, security engineering, traffic engineering and building control technology.
Thanks to the robust design of all its components, the RAID0/1/5 design of its HDD subsystems and the redundant power supply unit, the quiet (<35 dBA) Kontron KISS-4U servers are at less of a risk of overheating than conventional IT servers during longer heatwaves with ambient temperatures of up to 50°C in the server room (eg, during airconditioning overloads). Three temperature-controlled, quiet and hot swappable fans simplify the servicing of these robust and shock-resistant systems whose MTBF is specified as 50 000 hours (5,7 years continuous operation). Should the power supply unit or hard drive fail, the redundant components will take over. If the IPMI System Management Module is used, the system condition can be remotely and continuously monitored and managed. This guarantees high availability and low maintenance expenses.
The KISS-4U servers currently offer all the relevant standard interfaces and various PCI, PCI-X and PCIe expansion slots. Three 5,25-inch and two 3,5-inch bays, as well as a slimbay slot, all of which are front-side accessible and shock-resistant mounted offer, in addition, sufficient space for hard drives or other modules. A further 3,5-inch bay is available inside. The chassis for the Kontron KISS system is designed either for desktop use or for installation in 19 inch cabinets. The lockable front cover offers IP20 protection. Kontron KISS systems are designed for continuous operation and are CE-certified and UL-suitable.
The servers support Windows 2000, Windows XP, Windows 2003 Server and Vista, and are available as standard systems or can be customised as needed and delivered as tested and independently certified solutions.
For more information contact Osiris Technical Systems, 0861 OSIRIS.
© Technews Publishing (Pty) Ltd | All Rights Reserved
printer friendly version