Power Electronics / Power Management


500 mA single-output MOSFET drivers

19 September 2007 Power Electronics / Power Management

Microchip has released the MCP1401 and MCP1402 (MCP140X) single-output MOSFET drivers. The inverting MCP1401 and non-inverting MCP1402 are rated for a peak output current of 0,5 A, over a wide operating voltage range of 4,5 to 18 V. They have excellent latch-up immunity and are available in miniature, 2 x 3 mm DFN and 5-pin SOT-23 packages. By positioning the tiny gate driver close to the MOSFET's physical gate connection, designers can minimise gate bounce caused by the parasitic PCB layout, gate rise and fall times, propagation delay times and shoot-through current, all of which help to increase system efficiency and reduce power dissipation. For higher peak output current applications, Microchip offers the 4,5 A MCP1403/4/5 dual and 6 A MCP1406/7 MOSFET drivers. The MCP1403/4/5 devices are available in 8- and 16-pin SOIC and PDIP packages, as well as a 6 x 5 mm DFN package, while the MCP1406/7 drivers are available in 8-pin SOIC, PDIP and 6 mm x 5 mm DFN packages, as well as a 5-pin TO220 package.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Accelerate development of physical AI deployments
Altron Arrow DSP, Micros & Memory
With Avocado OS now available on the HummingBoard RZ-V2N- AIoT and SolidSense AIoT V2N from SolidRun, teams can move from prototype to deployed fleet in weeks.

Read more...
Setting a new benchmark for high-power DC load testing
Conical Technologies Test & Measurement Power Electronics / Power Management
The new ITECH IT8900G/L high-speed, high-power DC electronic load offers a powerful combination of speed, scalability, precision and high-power density.

Read more...
Universal NFC device
Altron Arrow DSP, Micros & Memory
Delivering high-end performance in a compact 4 x 4 mm package, the multipurpose NFC reader from ST Microelectronics, enables the convenience of contactless interaction and features for various end applications.

Read more...
Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow AI & ML DSP, Micros & Memory
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
SoC brings scalable edge AI to life
Altron Arrow AI & ML
The NXP i.MX 937 applications processor is optimised for performance without excessive power draw and bridges the gap between entry-level chips and high-end processors.

Read more...
Accelerate STM32-based IoT development with SPI EEPROM board
Altron Arrow Computer/Embedded Technology
ST Microelectronics’ ready-to-use STM32 expansion board helps design more efficient battery-friendly IoT devices based on ultra low power 32-Mbit Page.

Read more...
Compact direct Time-of-Flight 3D LiDAR module
Altron Arrow Opto-Electronics Electronics Technology AI & ML
The VL53L9 from STMicroelectronics is the first direct Time-of-Flight (dToF) 3D LiDAR all-in-one module in ST’s portfolio, offering a resolution of 2,3K zones, wide field of view, on-chip processing, 100 frames per second, and sensing range from 5 centimeters to 9 meters.

Read more...
Quality batteries are critical for IIoT
Uniross Batteries Power Electronics / Power Management
Batteries intended for use in industrial operations must indeed offer complete reliability under extreme environmental conditions, resistance to vibration and harsh environments.

Read more...
12 kW hybrid inverter
Power Electronics / Power Management
Sungrow recently unveiled its next-generation residential energy storage solution, expanding its power range from 5 kW to 12 kW with the introduction of the new MG12RL hybrid inverter.

Read more...
40 W and 75 W railway DC/DC converter
Brabek Power Electronics / Power Management
RECOM has announced two new cost-efficient DC/DC converters for the rail market with an ultra-wide 11:1 input range to cover all nominal input voltages from 24 to 110 V DC.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved