Maxim's new MAX9930/1/2/3 are low-power logarithmic amplifiers designed to control RF power amplifiers and transimpedance amplifiers (TIAs), and detect RF power levels. These devices provide a choice of three different input-voltage ranges, thus eliminating the need for external attenuators and simplifying amplifier control-loop design. They are designed to operate in the 2 MHz to 1,6 GHz frequency range and have a typical dynamic range of 45 dB with an accuracy of ±1 dB, making them useful in a variety of wireless and GPON fibre video applications such as transmitter power measurement and RSSI for terminal devices. Each of these amplifiers measures voltage in a distinct, typical signal range: -58 dBV to -13 dBV (MAX9930/MAX9933), -48 dBV to -3 dBV (MAX9931) and -43 dBV to +2 dBV (MAX9932). The devices consume 5,9 mA with a 5 V supply, with a typical shutdown current of 13 μA. They also feature a glitch-free output by asserting a power-on delay when coming out of shutdown.
Full sensor to cloud solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...Banana Pi with NPU CST Electronics
AI & ML
The latest Banana Pi SBC, the BPI-M7, is powered by Rockchip’s latest flagship RK3588 octa-core 64-bit processor, with a maximum frequency of 2,4 GHz.
Read more...Hardened-grade network switches CST Electronics
Computer/Embedded Technology
Lantronix’s hardened switches provide Layer 2 or Layer 3 networking, and are available as Power-over-Ethernet (PoE) or Power-over-Ethernet Plus (PoE+).
Read more...Energy measurement IC CST Electronics
Power Electronics / Power Management
The SY7T501 and SY7T502 are Silergy’s newest energy measurement ICs for cost-sensitive IoT applications such as smart-plugs, dimmers, power-strips, intelligent lighting, and other points of load.
Read more...Easy wireless mesh networking CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has announced three new NeoMesh Click boards that are ideal for wireless mesh networking, eliminating the need for engineers to create any development PCB hardware themselves.
Read more...LoRa transceiver module CST Electronics
Telecoms, Datacoms, Wireless, IoT
The RYLR896 transceiver module from REYAX features the LoRa long range modem that provides ultra-long range spread spectrum communication.
Read more...High-performance antenna solution CST Electronics
Telecoms, Datacoms, Wireless, IoT
The Spitfire Series of antennas delivers exceptional performance with its dipole design, ground plane independence, and easy wall-mount versatility for both indoor and outdoor environments.
Read more...SMD antenna for GNSS L1 band CST Electronics
Telecoms, Datacoms, Wireless, IoT
Antenova has recently launched the Admotus SMD antenna, a ceramic antenna suitable for all GNSS positioning applications in the L1 band covering 1559 to 1609 MHz.
Read more...High-speed PIN diode Altron Arrow
Analogue, Mixed Signal, LSI
Vishay’s new high-speed Silicon PIN diode is able to detect both visible and near infra-red radiation over a wide spectrum range from 350 to 1100 nm.
Read more...Analogue front end for sensor measurements Electrocomp
Analogue, Mixed Signal, LSI
The NJU9103 AFE from Nisshinbo is a tiny analogue front end, with a 16-bit resolution ADC and up to 512 x signal amplification from the programmable gain amplifier.
printer friendly version