Telecoms, Datacoms, Wireless, IoT


2,5 Gbps POS-PHY Level 3 devices

28 February 2001 Telecoms, Datacoms, Wireless, IoT

Consuming just 2,4 mA per op-amp, the Micrel MIC915 dual and MIC916 triple op-amps are designed to meet the needs of power-sensitive high-speed applications. Both devices share the same key specifications as Micrel's advanced MIC910 single op-amp. Supply current is just 2,4 mA per op-amp, the devices are unity-gain stable, and like the rest of the MIC91x family, the MIC915 and MIC916 in SOT23-5 package can drive any capacitance load. Both devices are specified at supply voltages of ±2,5 V and ±9 V. Input offset voltage is 1 mV (typical), large signal voltage gain is 73 dB, PSRR is 81 dB and CMRR is 98 dB; gain-bandwidth product is 135 MHz and slew rate is 270 V/µs.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Connectivity for IoT devices with SoftSIM
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
IoT device vendors are facing more and more complex cellular connectivity issues these days. Manufacturing is often outsourced to third-party factories and finished devices are being distributed to many ...

Read more...
High-power GaN RF amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA7618-99F is a three-stage GaN high-power amplifier (HPA) in the frequency band 5,5-18 GHz. This United Monolithic Semiconductors HPA typically provides 10 W of output power allied with 20% of power-added ...

Read more...
ExpressLink modules for secure connectivity to AWS Cloud
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox has announced two new modules designed to enable Amazon Web Services (AWS) cloud services for device and fleet management out of the box: the NORA-W2 AWS IoT ExpressLink Wi-Fi module and the SARA-R5 ...

Read more...
Cellular antenna for 4G/LTE and 5G NR
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Antenova’s new ‘Affini’ (part number SRFL064) is a flexible printed circuit (FPC) antenna for the LTE, 4G and 5G NR networks in global markets. This antenna covers all main 4G bands plus 617-698 MHz which ...

Read more...
Passive MMIC diplexer
RF Design Telecoms, Datacoms, Wireless, IoT
The MDPX-0710 from Marki Microwave is a passive MMIC diplexer with passbands from DC to 7 GHz (low band) and 10 to 26,5 GHz (high band). It has an insertion loss of less than 0,9 dB within its passbands ...

Read more...
Automotive-grade GNSS signal splitter
RF Design Telecoms, Datacoms, Wireless, IoT
Tallysman Wireless has added the TW162A automotive-grade ‘Smart Power’ GNSS signal splitter to its line of GNSS accessories. The device supports the full GNSS spectrum: GPS/QZSS-L1/L2/L5, QZSS-L6, GLONASS-G1/G2/G3, ...

Read more...
u-blox extends ‘bring your own SIM’ approach to MQTT
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox has introduced a service that gives IoT sensor network developers the flexibility to combine any cellular connectivity with all the benefits of MQTT communication. The u-blox MQTT Flex service ...

Read more...
GNSS correction service receivers for cm-level accuracy
RF Design Telecoms, Datacoms, Wireless, IoT
For designers who require reliable centimetre-level positioning accuracy, e.g. for the industrial navigation and robotics markets, a new suite of products and feature additions have been rolled out by ...

Read more...
4xMIMO cross-polarised antenna
RF Design Telecoms, Datacoms, Wireless, IoT
The TGX.04 from Taoglas is a 5G/4G 4xMIMO dipole antenna that operates from 450 to 6000 MHz. It supports worldwide sub-6 GHz cellular bands including 5G NR, LTE, NB-IoT, etc. This cross-polarised ...

Read more...
High-linearity, multi-octave RF mixers for up to 40 GHz
RF Design Telecoms, Datacoms, Wireless, IoT
Two new SMT-packaged multi-octave RF mixers featuring high linearity and broad bandwidths have been added to Marki Microwave’s stable of products. The MM1-1040HPSM is an ideal choice for 5G signal ...

Read more...