Computer/Embedded Technology


PC/104-Plus extension card for CAN networks

14 May 2008 Computer/Embedded Technology

Digital-Logic's new Microspace PC/104-Plus extension card MSMCA104+ISOL is a compact, high-performance solution for connecting up to two CAN networks with a PC/104-Plus system. The 32-bit card is equipped with two 16 MHz SJA1000 CAN controllers and two 82C251 CAN transceivers, and transfers data at baud rates of up to 1 Mbps.

Both CAN interfaces guarantee galvanic isolation of up to 500 V between the PC/104-Plus and the CAN side. The two CAN controllers are connected to the 32-bit PCI bus by an FPGA and require only one PCI resource.

The card has dimensions of 90 x 96 x 17 mm (W x L x H) and a weight of 80 grams. It requires a 3,3 or 5 V power supply and operates within the temperature range of -25°C to +70°C. An MTBF (mean time between failures) value of over 200 000 hours confirms the high level of reliability and longevity of the PC/104-Plus board. Typical applications are measurement engineering, vehicle bus and PLC connection.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Next-gen modules for rugged edge AI systems
Altron Arrow Computer/Embedded Technology
Designed for real-world edge deployments where systems do not sit still, SolidRun’s P100 COMx6 series targets mobile platforms as well as harsh, mission-critical environments.

Read more...
Fanless multimedia edge PC
Vepac Electronics Computer/Embedded Technology
Dual 4K display capabilities, ultra-efficient processing, and versatile mounting options make the Intelli TWL01 Edge the ultimate embedded platform for multimedia solution building.

Read more...
Advanced industrial connectivity at the edge
Future Electronics Computer/Embedded Technology
Dual 4K display capabilities, ultra-efficient processing, and versatile mounting options make the Intelli TWL01 Edge the ultimate embedded platform for multimedia solution building.

Read more...
A software-based controller for the industrial future
Phoenix Contact Computer/Embedded Technology
With Virtual PLCnext Control, Phoenix Contact is launching a software-based controller solution that enables flexible automation functions in virtualised IT environments.

Read more...
5G mobile hotspot with integrated multimodal AI capabilities
CST Electronics Computer/Embedded Technology
MeiG Smart has launched its first 5G Mobile HotSpot solution, the SRT8710, a breakthrough in mobile connectivity that combines ultra-fast 5G communications with integrated multimodal artificial intelligence functions.

Read more...
Panasonic TOUGHBOOK 33 2-in-1 detachable
Vepac Electronics Computer/Embedded Technology
The Panasonic TOUGHBOOK 33 is a fully rugged 12-inch 2-in-1 detachable notebook designed to deliver unmatched flexibility, durability, and performance for mobile professionals working in demanding environments.

Read more...
SBC with 12 TOPS computing power
iCorp Technologies Computer/Embedded Technology
The QSM560DR series is Quectel’s multi-mode 5G smart control panel with built-in Ubuntu/Android/Windows operating system based on the Quectel SG560D series smart module.

Read more...
High-performance µC series
NuVision Electronics Computer/Embedded Technology
GigaDevice has announced the official launch of the GD32F503/505 high-performance series of 32-bit general-purpose microcontrollers based on the Arm Cortex-M33 core.

Read more...
Octa-core smart development board
iCorp Technologies Computer/Embedded Technology
The QuecPi Alpha smart MOB development board is Quectel’s smart development board based on Qualcomm’s QCS6490 high-performance 64-bit octa-core processor.

Read more...
Vertiv expands rack PDU portfolio
Computer/Embedded Technology
Vertiv has announced its new Vertiv PowerIT rack power distribution units designed to address the rising power needs of data-intensive workloads, including AI and high-performance computing.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved