PC-based data acquisition system

Telecoms, Datacoms, Wireless, IoT

Microwave semiconductor & tube suppliers

Radio system suppliers

RF module & subsystem suppliers

Telephony IC suppliers

Wireless system IC/module suppliers

printer friendly version

28 May 2008 Telecoms, Datacoms, Wireless, IoT

The new SL1000 from Yokogawa is a PC-based data acquisition unit designed to provide high-speed data-logging and fast data transfer in electro-mechanical and power measurement applications.

Featuring 100 MSps sampling on 16 channels and isolated inputs for high-voltage measurements, the SL1000 is also equipped as standard with intuitive, easy-to-use logging and control software for quick startup and setup.

In addition to its high-speed acquisition, the SL1000 will transfer data to a PC or record to its internal hard drive at rates up to 1,6 MSps. Data transfer is via USB 2.0 or 1000BASE-T Gigabit Ethernet. A standalone mode also allows data-logging without a PC.

The high-speed acquisition rate of 100 MSps is maintained across all 16 channels, and is also available on a new 12-bit 1 kV isolation module with 20 MHz bandwidth. Acquisition trigger modes include normal, single and single (N) condition. The SL1000 supports parallel testing, and can perform measurements simultaneously on up to four groups of signals with independent sample rates.

Eight module slots are provided for plug-in modules, of which 12 types are currently available for parameters including voltage, temperature, strain, acceleration and frequency. Each module incorporates its own analog/digital converter, and the instrument incorporates 'plug-and-play' automatic recognition of units and modules.

For more information contact Trevor Grundlingh, Protea Electronics, +27 (0)11 719 5700, [email protected], www.cme.co.za

Share this article:

SIMCom’s A7673x series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.

Read more...

Accelerating the commercialisation of the 5G IoT markets
Altron Arrow Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.

Read more...

Long-range connectivity module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.

Read more...

4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.

Read more...

Antennas to meet all connectivity requirements
Electrocomp Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.

Read more...

Introducing SIMCom’s new A7673X series
Otto Wireless Solutions Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.

Read more...

18 W monolithic microwave amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.

Read more...

Categories

Telecoms, Datacoms, Wireless, IoT

PC-based data acquisition system

Further reading:

Publications by Technews