8-port RS232 universal PCI card
25 June 2008
Computer/Embedded Technology
Advantech’s PCI-1625U is an 8-port RS232 universal PCI communication card operating at speeds of up to 921,6 Kbps. The card has an onboard DSP processor that takes over the processing load from the host PC.
When large amounts of data from multiple ports are transferred, servicing the interrupts alone can consume a large percentage of the capacity of a computer’s CPU. For this purpose, the PCI-1625U also serves as a high-speed dedicated interrupt processor. It has 1 MB of SRAM, which can store serial data and reduce host CPU loading. When the card initialises, it downloads the driver software (which functions like a PC’s BIOS) into its onboard DSP. This improves performance and simplifies version upgrading, thereby eliminating hardware redundancy.
The PCI-1625U has a universal PCI connector that is compatible with both a 3,3 V and 5 V PCI bus. It also provides ICOM Tools, a convenient utility program to help test the PCI card’s performance by analysing the port status. The menu commands and toolbar buttons of ICOM Tools acts as a PC-based data scope that sets a trigger condition, captures the communications data and monitors the signal status. ICOM Tools is applicable to all series of Advantech ICOM cards.
The PCI-1625U is designed for industrial applications where a PC needs to communicate with terminals, modems or other instruments. RS422 applications are also possible, and require the optional OPT8FP, 8-port RS232 to RS422 converter with 2500 V DC isolation protection. Up to four PCI-1625U cards may be installed for a total of 32 ports in any PCI bus-based PC.
Further reading:
From idea to intelligent product
TRX Electronics
Computer/Embedded Technology
Mouser Electronics has announced a new eBook in collaboration with Arduino – From Blink to Think: How Arduino UNO Q Helps Designers Go from Idea to Intelligent Product.
Read more...
Think Diamond Long-life COM-based SBCs
Electronic Products Design
Computer/Embedded Technology
A COM-based SBC combines the flexibility of a standard computer-on-module (COM) with a baseboard offering additional I/O, expansion sockets, power supplies, and I/O connectors. The result is a highly flexible, highly expandable, feature-dense product that can be adapted to the widest range of applications, offering maximum product lifetime.
Read more...
Next-Gen Min-ITX motherboard
Vepac Electronics
Computer/Embedded Technology
Adding to AAEON’s extensive industrial motherboard portfolio, the Next-Gen MIX-Q870A1 is the company’s most advanced Mini-ITX board to date.
Read more...
Rev 2.0 PolarFire FPGA ethernet sensor bridge
Altron Arrow
Computer/Embedded Technology
Smaller, multi-camera platform enables scalable Ethernet architectures for NVIDIA Edge AI systems, while lowering power, cost and integration complexity.
Read more...
Rugged combo antennas cut multi-network installations down to one
iCorp Technologies
Computer/Embedded Technology
Quectel Wireless Solutions has expanded its antenna portfolio with four rugged multi-network combo antennas.
Read more...
Intelligent video processing
Rugged Interconnect Technologies
Computer/Embedded Technology
The CHARM150AGX is based on a NVIDIA AGX Orin embedded processor, which incorporates a multicore ARM processor and powerful AI/ML accelerator.
Read more...
Quectel’s single-board computers put industrial edge computing on one PCB
iCorp Technologies
Computer/Embedded Technology
Quectel Pi series of single-board computers (SBCs), designed for a broad range of industrial applications, include three compact development platforms – the Quectel Pi M1, L1, and H1 boards.
Read more...
Nordic expands nRF Cloud with firmware vulnerability scanning
RF Design
Computer/Embedded Technology
nRF Cloud identifies vulnerabilities in firmware and shows exactly which deployed devices are affected, empowering device manufacturers to address EU Cyber Resilience Act requirements.
Read more...
Arrival of the Epic-PTH9
Vepac Electronics
Computer/Embedded Technology
AAEON introduces the EPIC-PTH9, a compact 4-inch industrial single-board computer powered by Intel Core Ultra Series 3 (formerly Panther Lake) processors.
Read more...
EPS-9600 Managed Layer 3 Ethernet Switch with next-generation Time- Sensitive Networking
Electronic Products Design
Computer/Embedded Technology
Diamond Systems has introduced EPS-9610 (part of the EPS-9600 family), a rugged, ultra-compact embedded Ethernet switch which integrates military-grade ruggedness with next-generation Time-Sensitive Networking (TSN) capabilities.
Read more...
printer friendly version