New LabVIEW toolkit for GPS receiver testing
3 September 2008
Design Automation
National Instruments has developed the NI GPS Toolkit for LabVIEW, an extension of the graphical system design environment that expands the NI RF PXI platform to include multisatellite GPS signal simulation. Using NI LabVIEW software to create waveforms that simulate up to 12 satellites (C/A codes in the L1 band), engineers can test receiver characteristics such as sensitivity, time to first fix (TTFF) and position accuracy with the NI PXIe-5672 RF vector signal generator.
With the new toolkit, engineers can use a combination of simulated and recorded GPS waveforms as a comprehensive, low-cost solution for receiver design validation and verification. By recording live GPS signals off the air with an NI PXI-5661 RF vector signal analyser and an NI PXI-5690 preamplifier, engineers can capture GPS signals with natural impairments that a receiver would observe in the real world. They can also generate both simulated and recorded signals with the NI PXIe-5672 RF vector signal generator, by continuously streaming GPS waveforms from hard disk. With a 2 TB redundant array of inexpensive disks (RAID) hard drive option, engineers can generate up to 12,5 minute of non-repeating simulated waveform or 25 hours of continuous recorded GPS signal to test how the receiver responds to a broad range of circumstances.
Engineers can combine the GPS Toolkit with the NI Modulation Toolkit for LabVIEW, NI TestStand test management software and PXI RF modular instrumentation for a complete low-cost production test solution. Because PXI modular instrumentation is purely software-defined, the same PXI system can test wireless devices that use other standards such as RDS, WiFi, GSM, WCDMA, Bluetooth and DVB. PXI measurement systems offer a lower cost, more flexible and higher throughput solution compared to traditional instrumentation in production test applications.
For more information contact National Instruments, 0800 203 199, [email protected], www.ni.com/southafrica
Further reading:
ST’s graphical no-code design software
Design Automation
MEMS-Studio is a complete desktop software solution designed to develop embedded AI features, evaluate embedded libraries, analyse data, and design no-code algorithms for the entire portfolio of ST’s MEMS sensors.
Read more...
LibGSM – A powerful, modular GSM library
eiTech Systems
Design Automation
Whether you are building SMS, MQTT, HTTP or other GSM-based applications, eiTech’s LibGSM library helps streamline development with its carefully structured design.
Read more...
NECTO Studio V7.2 IDE with code assistant
Design Automation
MIKROE recently announced that NECTO Studio 7.2 IDE now includes NECTO Code Assistant, an AI tool that enables users to create code for multi-Click projects.
Read more...
MPLAB unified compiler licenses
Design Automation
Offering an efficient way to manage multiple licenses, Microchip Technology has launched MPLAB XC unified compiler licenses for its MPLAB XC8, XC16, XC-DSC and XC32 C compilers.
Read more...
MPLAB PICkit Basic
ASIC Design Services
Design Automation
To make its robust programming and debugging capabilities accessible to a wider range of engineers, Microchip Technology has launched the MPLAB PICkit Basic in-circuit debugger.
Read more...
Accelerating RF PCB design in a 5G world
ASIC Design Services
Editor's Choice Design Automation
Billions of IoT devices coming online in the coming years will require RF design capabilities that support ultra-fast 5G speeds.
Read more...
NECTO Studio has been updated
Design Automation
NECTO Studio V7.1 IDE from MIKROE now includes full programmer and debug support for Microchip tools and also adds support for Microchip’s SAM MCU and STMicroelectronics’ STM32L4 series of ultra-low-power MCUs.
Read more...
Altium provides free training
Design Automation
There is no longer any excuse not to master Altium Designer with the company now offering both advanced instructor-led three-day training and an on-demand video series.
Read more...
Altium syncs your design and PCB programming software
EDA Technologies
Design Automation
Altium Designer and Altium 365 can keep track of everything needed in PCB design, PCB programming language, component sourcing, and much more, as an embedded application is developed.
Read more...
New Studio 6 SDK
Design Automation
New Simplicity Studio 6 SDK opens development environment, and opens developers to Series 3.
Read more...
printer friendly version