M2M evaluation kits
17 September 2008
Telecoms, Datacoms, Wireless, IoT
To allow evaluation and design-in of the CMX990, the tiny RF transceiver with integrated GMSK modem from CML Microcircuits, two separate full-featured PCB-based kits are available, giving designers full access to all functions of the chip and its external components.
The EV9900A is a flexible platform to allow users to configure and evaluate the CMX990 for various applications and frequency bands. Initial configuration is for 410 to 430 MHz operation with 25 kHz channel spacing at 9600 bps.
The EV9902 provides a graphical user interface (GUI) for the EV9900A kit. The kit is supplied as a Hyperstone hyBoard-XS evaluation board plus interface PCB, together with GUI software for a PC. The EV9902 connects simply to a Windows-based PC via a standard USB cable.
The interface to the EV9900A is also supplied. The GUI software allows users to directly write to and read from the CMX990 registers and perform realtime tasks for Mobitex or free-format frame transfers live over a RF link. The GUI software will calculate the CMX990 register values required to generate the user’s desired PLL frequencies and bit rates. The hyBoard-XS evaluation board is supplied pre-loaded with firmware, allowing realtime operations to be performed.
The CMX990 is a complete, low-power, single-chip wireless M2M (machine to machine) GMSK modem solution, available in a ‘no-leads’ 64-pin VQFN package, with no minimum order quantity.
Further reading:
What does Wi-Fi 7 mean for South African networks?
Telecoms, Datacoms, Wireless, IoT
With Wi-Fi 7 (802.11be), we are finally looking at a standard that was built, not just for more devices, but for the new way networks are used.
Read more...
Multiprotocol wireless SoC
RF Design
Telecoms, Datacoms, Wireless, IoT
The nRF54LM20A from Nordic Semiconductor is a multiprotocol wireless System-on-Chip designed for demanding designs in Bluetooth devices.
Read more...
High performance communication
iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Quectel’s FCS950R is a high-performance Wi-Fi 5 and Bluetooth 4.2 module that can deliver a maximum data rate up to 433,3 Mbps in 802.11ac mode.
Read more...
Expanded STM32WL3x line for IoT sensors
Altron Arrow
Telecoms, Datacoms, Wireless, IoT
The STM32WL31x and STM32WL30x are more tailored versions of the STM32WL33x for designers who wish to focus on specific features, while lowering their bill of materials.
Read more...
Full-band GNSS helical antenna
RF Design
Telecoms, Datacoms, Wireless, IoT
A key feature of Calian’s HC3990XF antenna design is that it does not require a ground plane, making it ideal for size-constrained applications.
Read more...
BLE and BT Mesh module
iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
The HM-BT4531 from HOPERF is a BLE data transmission module that features an ARM Cortex-M0 32-bit processor.
Read more...
Espressif entering the Wi-Fi 6E market
iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Espressif Systems is entering the Wi-Fi 6E market, extending its connectivity portfolio into the domain of high-throughput, low-latency wireless solutions.
Read more...
Ultra-low jitter clock buffers
Altron Arrow
Telecoms, Datacoms, Wireless, IoT
New SKY53510/80/40 family of clock fanout buffers from Skyworks are purpose-built for data centres, wireless networks, and PCIe Gen 7 applications.
Read more...
Cutting-edge broadband power amplifier
RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
Designed for high efficiency and reliability, the WPGM0206012M from WAVEPIA is a cutting-edge broadband GaN MMIC power amplifier operating from 500 MHz to 8,5 GHz.
Read more...
The trends driving uptake of IoT Platform as a Service
Trinity IoT
Editor's Choice Telecoms, Datacoms, Wireless, IoT
IoT platforms, delivered as a service, are the key that will enable enterprises to leverage a number of growing trends within the IT space, and access a range of benefits that will help them grow their businesses.
Read more...
printer friendly version