SAW resonators for ISM band
18 March 2009
Telecoms, Datacoms, Wireless, IoT
Murata’s latest family of SAW resonators is designed for short range devices (SRDs) operating in the ISM300 and ISM400 bands, and achieves ±50 ppm tolerance.
Because of its tight tolerance, the SARCC series helps designs comply with the latest ETSI (European Telecommunications Standards Institute) frequency error standard.
Almost four years since Murata first introduced the three millimetre square package, brand new technology has meant further performance improvements. The thermal coefficient has been reduced by almost 50% to 0,016 ppm/°C² and the resonant loss has been improved by approximately 1 dB to 1,5 dB. The range is offered with tolerance of either ±50 kHz or ±50 ppm, compared to the ±75 kHz offered by previous generations.
Resonators in the SARCC series come in two types, each named using a different suffix: part numbers suffixed -KX are intended for the consumer electronics applications and are also suitable for some automotive applications such as RKE (remote keyless entry) systems. Part numbers suffixed -TX are full automotive grade (AEC-Q200) devices, suitable for applications such as TPMS (tyre pressure monitoring systems).
The new family, which covers the most common frequencies, is available in 3,0 x 3,0 mm, 6-pin ceramic packaging and is backward compatible with older devices.
Further reading:
Full sensor to cloud solution
CST Electronics
Telecoms, Datacoms, Wireless, IoT
NeoCortec has demonstrated the seamless and rapid development of full sensor-to-cloud solutions using NeoMesh Click boards from MikroE and the IoTConnect cloud solution from Avnet.
Read more...
Long-range Wi-Fi HaLow module
TRX Electronics
Telecoms, Datacoms, Wireless, IoT
One of Mouser’s newest products is the Morse Micro MM6108-MF08651-US Wi-Fi HaLow Module, which adheres to the IEEE 802.11ah standard.
Read more...
Quectel launches 3GPP NTN comms module
Quectel Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
Quectel Wireless Solutions has announced the Quectel BG95-S5 3GPP non-terrestrial network (NTN) satellite communication module.
Read more...
SIMCom’s A7673x series
Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat.1 bis module based on the ASR1606 chipset, that supports wireless communication modes of LTE-FDD, with a maximum downlink rate of 10 Mbps and a maximum uplink rate of 5 Mbps.
Read more...
Accelerating the commercialisation of the 5G IoT markets
Altron Arrow
Editor's Choice Telecoms, Datacoms, Wireless, IoT
Fibocom unveils Non-Terrestrial Networks (NTN) module MA510-GL, enabling satellite and cellular connectivity to IoT applications.
Read more...
Long-range connectivity module
Avnet Silica
Telecoms, Datacoms, Wireless, IoT
Digi XBee XR 868 RF Modules support the deployment of long-range connectivity applications, and support point-to-point and mesh networking protocols.
Read more...
4G LTE-M/NB-IoT connectivity reference design
iCorp Technologies
Telecoms, Datacoms, Wireless, IoT
Developed around the industry-leading Nordic nRF9160 module, the platform comes complete with a newly-developed LTE antenna, ATRIA, which is pre-certified to operate over the full LTE-M and NB-IoT bands.
Read more...
Antennas to meet all connectivity requirements
Electrocomp
Telecoms, Datacoms, Wireless, IoT
Kyocera AVX RF antennas meet today’s connectivity demands in the LTE, Wi-Fi, Bluetooth, GNSS, and ISM wireless bands, available in surface mount, patch or external configurations.
Read more...
Introducing SIMCom’s new A7673X series
Otto Wireless Solutions
Telecoms, Datacoms, Wireless, IoT
SIMCom recently released the A7673X series, a Cat 1 bis module that supports LTE-FDD, with a maximum downlink rate of 10 Mbps and an uplink rate of 5 Mbps.
Read more...
18 W monolithic microwave amplifier
RFiber Solutions
Telecoms, Datacoms, Wireless, IoT
The CHA8612-QDB is a two stage, high-power amplifier operating between 7,9 and 11 GHz. The monolithic microwave amplifier can typically provide 18 W of saturated output power and 40% of power-added efficiency.
Read more...