Telecoms, Datacoms, Wireless, IoT


Power amplifiers for WCDMA and HSPA+

15 April 2009 Telecoms, Datacoms, Wireless, IoT

RF Micro Devices has released the new RF720x family of WCDMA/HSPA+ power amplifiers (PAs). Comprised of four PAs designed for 3G multimode devices implementing mode-specific, band-specific front end architectures, the product family accommodates all major WCDMA/HSPA+ bands and band combinations.

The RF7200 (band 1), RF7206 (band 2), RF7203 (band 3, 4, 9 or 10) and RF7211 (band 11) are designed for single-band operation, while the RF7201 (band 1/8), RF7202 (band 2/5) and the RF7205 (band 1/5) feature two band-specific PAs integrated in a single module package. Each band of amplification is addressed with a band-specific high-efficiency, linear power amplifier designed to lower current consumption as output power levels decrease. The improvement in low-power efficiency is enabled through the use of three digital power modes that adjust bias current and optimise the PA for the desired output power range while maintaining linearity.

Each PA in the RF720x family includes an integrated output power coupler, which eliminates the need for external couplers in chipsets monitoring and adjusting PA output power. The integrated power coupler also reduces the board area required for front end implementation and lowers bill-of-material costs.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Quectel introduces tri-band MCU Wi-Fi 6E module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
Supporting operation across the 2,4 GHz, 5 GHz, and 6 GHz bands, the FGMC63N delivers true tri-band capability in a compact, integrated design.

Read more...
u-blox redefining what’s possible
RF Design Telecoms, Datacoms, Wireless, IoT
u-blox achieved what was once thought impossible with the launch of the DAN-F10N, the industry’s smallest and most reliable L1, L5 dual-band GNSS antenna module.

Read more...
Channel sounding on Bluetooth module
Avnet Silica Telecoms, Datacoms, Wireless, IoT
The latest Bluetooth module from Panasonic Industry provides excellent performance and minimal power consumption.

Read more...
Multiprotocol SoC
RF Design Telecoms, Datacoms, Wireless, IoT
The nRF54LM20A from Nordic Semiconductor is a multiprotocol wireless System-on-Chip designed for demanding wireless Bluetooth designs.

Read more...
TDK launches DRIVE
Avnet Abacus Telecoms, Datacoms, Wireless, IoT
TDK launches DRIVE, a platform designed to unlock control-grade accuracy for advanced vehicle platforms without perception sensors.

Read more...
High-performance Wi-Fi and Bluetooth module
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The FCU741R is a high-performance Wi-Fi 4 module launched by Quectel, supporting 2,4 and 5 GHz frequencies which can be used for WLAN connection.

Read more...
RF agile transceiver
Altron Arrow Telecoms, Datacoms, Wireless, IoT
The AD9361 from Analog Devices is a high performance, highly integrated RF Agile Transceiver designed for use in 3G and 4G base station applications.

Read more...
GaN power amplifier
RFiber Solutions Telecoms, Datacoms, Wireless, IoT
Designed on a 0,15 µm GaN-on-SiC process, Macom’s 35 W high-power amplifier delivers a perfect blend of efficiency and resilience.

Read more...
Ceramic substrate loop antenna
RF Design Telecoms, Datacoms, Wireless, IoT
The DLA.01 DECT ceramic loop antenna from Taoglas is a miniature edge mounted antenna designed for compact devices with minimal space availability.

Read more...
High-performance MCU with mesh communication
iCorp Technologies Telecoms, Datacoms, Wireless, IoT
The KGM133S is a high-performance by Quectel that boasts an ARM Cortex-M33 processor with a frequency of up to 78 MHz, and Matter, Thread, Zigbee, BLE 6.0, and BLE mesh.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved