Silicon Laboratories recently expanded its small form factor microcontroller (MCU) lineup with the C8051T606 low-cost 8-bit mixed-signal MCU. Measuring only 2 x 2 mm, the device integrates a voltage monitor and precision oscillator, making it well suited for space-constrained applications such as portable consumer products and accessories, gateways and LED lighting.
The hardware implementation of I²C and UART on-chip leaves valuable code space for customer application code. An integrated 24,5 MHz precision internal oscillator and flexible UART baud rate generator allow UART communications over the full temperature and supply voltage range without the addition of a crystal.
With a 25 MHz CPU, the T606 offers a high level of processing power, enabling realtime control, high-speed serial communication, fast interrupt servicing, and realtime conversion between two different communications ports. The CPU combined with the programmable counter array (PCA) also allows a designer to implement proprietary and custom interface protocols without requiring an ASIC.
Cost-effective microcontroller series Altron Arrow
DSP, Micros & Memory
The STM32C5 series from STMicroelectronics delivers an excellent balance of performance, efficiency, and affordability for embedded designs that require more capability without increasing bill of materials cost.
Read more...Battery-friendly Thread and BLE solution iCorp Technologies
DSP, Micros & Memory
Positioned as an incremental upgrade to the ESP32-H2, Espressif’s ESP32-H21 adds an integrated DC-DC converter that reduces active current draw and helps extend battery life in power-sensitive consumer and industrial devices.
Read more...Next generation HMI processing platform Future Electronics
DSP, Micros & Memory
Microchip’s latest hybrid MCU SiP integrates an Arm926EJ-S processor with 512 Mb of DDR2 SDRAM and is engineered to meet the rising demand for sophisticated HMI solutions in modern vehicles.
Read more...Low-power SoC for IoT designs iCorp Technologies
DSP, Micros & Memory
Espressif’s ESP32-H4 is a dual-core 32-bit RISC-V SoC designed for battery-powered wireless products that require low energy consumption, strong security, and modern connectivity.
Read more...Chip for high-density power Future Electronics
DSP, Micros & Memory
Microchip’s dsPIC33AK256MPS306 Digital Signal Controllers combine high-resolution control, high-speed analogue, and security with support for post-quantum cryptography.
Read more...The end of ‘entry-level’: STMicroelectronics’ STM32C5 sets a new baseline for embedded systems
DSP, Micros & Memory
[Sponsored] Instead of incrementally improving legacy Cortex-M0+ architectures, STM32C5 introduces a Cortex-M33-based platform into the entry-level category. This changes not only performance expectations, but also how engineers approach system architecture, consolidation, and long-term scalability.
Read more...GigaDevice expands GD25UF Series density NuVision Electronics
DSP, Micros & Memory
GigaDevice has announced the expanded density range of its GD25UF series 1,2 V ultra-low power SPI NOR Flash, now spanning from 8 Mb to 256 Mb.
Read more...ARINC 429 line driver evaluation board ASIC Design Services
DSP, Micros & Memory
Holt Integrated Circuits have announced the release of the ADK-85104 Evaluation Board, a compact, ready-to-use platform designed to help engineers rapidly evaluate and characterise Holt’s HI-85104.
Read more...Highly integrated 24-channel mixed signal IC EBV Electrolink
DSP, Micros & Memory
Microchip Technology has announced the LX4580, a 24-channel mixed-signal IC designed to replace multiple discrete components with a single device that supports synchronised data acquisition, fault monitoring, and motor control.
Read more...Lower-power Thread and BLE connectivity iCorp Technologies
DSP, Micros & Memory
Espressif has released the ESP32-H21, a low-power wireless SoC aimed at Thread, Matter, Zigbee, and Bluetooth LE device designs.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version